If this is from the virtual machine – the virtual machine itself is the problem. If you’re unsure about how to get this fixed in the virtualization environment, it’s probably better to stick with real hardware.

/Peter

Från: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] För Siri MM
Skickat: den 8 mars 2013 07:38
Till: FreeSWITCH Users Help
Ämne: [Freeswitch-users] Abnormally large timer gap ...

Hello All,

I have built freeswitch on a Virtual Ubuntu machine (6.06), and have deployed the same on a real Ubuntu hardware. When I run freeswitch on this box, I get the following messages:

.

.

2013-03-08 17:30:42.719156 [CONSOLE] switch_time.c:1315 Calibrating timer, please wait...
.

.

2013-03-08 17:30:47.959110 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1
2013-03-08 17:30:48.058960 [CONSOLE] switch_time.c:250 Test: 1001 Average: 1996 Step: 1
2013-03-08 17:30:48.108886 [CONSOLE] switch_time.c:250 Test: 1000 Average: 997 Step: 1
2013-03-08 17:30:48.240704 [CONSOLE] switch_time.c:250 Test: 1001 Average: 2635 Step: 1
Do you have your kernel timer frequency set to lower than 1,000Hz? You may experience audio problems

.

.

I am yet to test the audio (will take some time before other hardware is setup), but just wanted to know if my approach alright? Should I be worried about these logs?

Thanks!

!DSPAM:51398a7932764042727912!