or go over the limit and you'll have Max Headroom =D


On Thu, Jun 18, 2009 at 1:16 PM, David Knell <dave@3c.co.uk> wrote:
- plus UDP/RTP overhead.  Budget 10 calls/megabit for G.711 and you'll
have a bit of headroom available.

--Dave

> Most calls are at 8kHz. The formula for bandwidth is sampling rate *
> bit rate * channels, so 8000 * 8 * 1 = 64000 = 64kbps (per way).
>
>
> Math
>
> On 18-Jun-09, at 1:01 PM, Andy wrote:
>
> > Thanks Brian,
> >
> > So, just to calrify will the base call always be 8kHz?
> >
> > On a related note, do you happen to know the bitrate of each open
> > channel/live call? Is it 16 kilobits per second like the recorded
> > audio? I need to do some calculations on the badwidth required to
> > handle a certain number of concurrent calls.
> >
> > Many thanks
> > Andy
> >
> >
> > ____________________________________________________________________
> > From: freeswitch-users-bounces@lists.freeswitch.org
> > [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of
> > Brian West
> > Sent: 18 June 2009 18:11
> > To: freeswitch-users@lists.freeswitch.org
> > Subject: Re: [Freeswitch-users] Sample rate and recordFile
> >
> >
> >
> >
> > On Jun 18, 2009, at 11:54 AM, Andy wrote:
> >
> > > 1) I notice that when I change the sample rate it automatically
> > > changes the bit rate too. I understand why this is the case but
> > > wondered if it was just as easy to be able to control the bitrate
> > > as well as the sample rate.
> >
> >
> > If you're talking about mod_shout, NO.  You'll end up picking an
> > invalid bitrate and asking why it doesn't work... been there done
> > that... I changed it a few months back to pick the optimal bitrate
> > for the sample rate.
> >
> > > 2) When I use a sample rate other than 8000 I get a warning
> > > 'Sample rate doesn't match'. I guess this puts some extra load on
> > > the server. If all my calls are being recorded and all at 11025
> > > can/should I alter the sample rate of the base call to 11025?
> >
> > NO.  Your phone call is running at 8kHz, Your sound file is 11025
> > and they don't match, If you were to play this file into an 8k
> > channel without a resample it would sound a little like satan.  or a
> > dragging tape deck.  The file has to be resampled to match the
> > current session rate.
> >
> >
> > /b
> >
> >
> > _______________________________________________
> > Freeswitch-users mailing list
> > Freeswitch-users@lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
--
David Knell, Director, 3C Limited
T: +44 20 3298 2000
E: dave@3c.co.uk
W: http://www.3c.co.uk



--
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale@hotmail.com
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888@conference.freeswitch.org
iax:guest@conference.freeswitch.org/888
googletalk:conf+888@conference.freeswitch.org
pstn:213-799-1400