Hi.

If you can get an old HUB ( http://en.wikipedia.org/wiki/Ethernet_hub ) you can capture the packets using wireshark between the spa962 and the spa9000. Then compare the packets between your spa962 and FS box. Put your call and sip trace from FS to pastebin so we can help to find the problem. Mail me the pcap file of the working and failed call if you can't find the differences between them.

I tried with a SPA502G and also can't make it work. I added the route ( ip route add 224.168.168.168 dev eth0:0 src 192.168.1.5 ) but in my case the interface has 2 IP address and multicast is sent from the main IP ( eth0 ) and not from eth0:0. Maybe this is the problem for me. I try different config options on the phone to make it work and post results to the list and wikify them if needed.


2012-02-11 23:10 keltezéssel, Mario G írta:
Scoured web sites, traces, etc. for a year no luck. Anyone out there with some info?

Can't get paging to work on Linksys SPA962s, I have check the multicast address and it matches FS. Here is what happens: If I connect my old Linksys SPA9000 PBX and power it on, then turn it off, FreeSwitch paging works on all the phone! If a phone is powered off, FreeSwitch paging no longer works on that phone. Power on/off SPA9000 and all is well. Anyone out there have it working that could tell me the secret? I am using *11 to page to trigger the rtp_multicast_page extension. Thanks in advance!
MarioG



_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org