Did you restart the profiles after doing reloadxml?
-MC

On Thu, Jun 28, 2012 at 2:08 PM, Joshua Nankin <jnankin@gmail.com> wrote:
sip-ip and rtp-ip in both external.xml and internal.xml were set to $${local_ip_v4}.  I figured that setting the ip in vars.xml would be enough.

I manually set sip-ip and rtp-ip and both of those files, but that still did not solve the problem.

Any other ideas?

On Thu, Jun 28, 2012 at 3:41 PM, Joshua Nankin <jnankin@gmail.com> wrote:
I have two interfaces on my machine, eth0=10.0.2.15 and eth1=192.168.1.7.  I'm trying to get freeswitch to only use eth1.  I've put the following at the top of my vars.xml:

<X-PRE-PROCESS cmd="set" data="local_ip_v4=192.168.1.7"/>

However, this does not seem to be working.  When I originate a call, I see that the initial invite is originating from 10.0.2.15, but incoming packets from my sip provider are going to 192.168.1.7 and are not being responded to by freeswitch.  Shouldn't freeswitch be listening on 192.168.1.7 and sending packets from there as well?

What am I doing wrong?

  


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

Join Us At ClueCon - Aug 7-9, 2012

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org