I'll keep that in mind. If more information is needed to get into the bottom of this, I will happily oblige. Thanks for helping.
On 04/06/2011 03:09 AM, Michael Collins wrote:I'll have to defer to those more experienced than I in such matters. However, I can offer two tips:
#1 - turn off the crazy sofia debugging - it's just noise. All you need to do to enable SIP trace is "sofia global siptrace on"#2 - when you pastebin the console output use the FreeSWITCH log syntax highlighting - it makes it *much* easier to see what's going on.
-MC
On Mon, Apr 4, 2011 at 10:51 PM, Joegen E. Baclor <joegen@opensipstack.org> wrote:
Hi Michael,
I have pasted both working and none working logs on pastebin.
FreeSWITCH Version 1.0.7 (hacked-20110326T123355Z)
working: http://pastebin.freeswitch.org/16008
not working: http://pastebin.freeswitch.org/16009
The call flow for the working call is
UA1 -> (FSBridgeDialPlan) -> (SIP-Loopback) -> (FSIVRApp)
FSIVRApp knows the uuid of the bridge call. Pressing # on the IVR results to a uuid_deflect on the bridged channel. This works and call successfully transfers to the new destination.
The call flow for the none working call is
1. UA1 -> UA2 is in conversation
2. UA1 puts UA2 on hold
-- start of FS interaction here --
3. UA1 -> (FSBridgeDialPlan) -> (SIP-Loopback) -> (FSIVRApp) (on line 2)
4. UA1 sends REFER (replacing its call with UA2) to FSBridgeDialPlan.
5. Flow is now UA2 -> ([REPLACED]FSBridgeDialPlan) -> (SIP-Loopback) -> (FSIVRApp)
6. UA2 presses #.
7. IVRApp performs uuid_deflect on FSBridgeDialPlan.
8. FSBridgeDialPlan drops call (no REFER is done)
Thanks for your help.
Joegen
On 04/05/2011 12:35 PM, Michael Collins wrote:What do you see on the console when you try this? A console debug log with siptrace would go a long way toward figuring out what is happening.
-MC_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Mon, Apr 4, 2011 at 9:27 PM, Joegen E. Baclor <joegen@opensipstack.org> wrote:
Hi List,
I have a scenario where a bridged call has been replaced due to a
consultative transfer. This works pretty well and audio is
bidirectional. I have the original uuid of the call in a var
somewhere. The trouble begins when I uuid_deflect the bridged call once
again to attempt another transfer. Sofia disconnects the channel. I am
using the original uuid of the call (uuid prior to replaces). Is this
the right way of doing it?
Joegen
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org