Well, 2 comments:
-you dont know the CPE endpoints involved ??? the endpoint is the SIP ATA which talks T38. I suppose you manage that
-SFR ? Ok, good luck with that :) I was not even aware they proposed that. I know they don't on their wholesale SIP trunk product, so that must be a direct SIP trunk (direct to customer).

David Ponzone  Direction Technique
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 27/05/2011 à 00:43, Mathieu Lautram a écrit :

David,

I am running freeswitch on CentOS. Faxes are sent by SFR which provides a T38-gateway. What I don't know is the endpoints involved. Indeed, I send faxes to our clients so I don't know what type of fax machine they have.

I know I give you only few informations but what I'd like to know is despite those responses, are the faxes correctly sent?

Thank you for your help :-)


2011/5/26 David Ponzone <david.ponzone@ipeva.fr>
Mathieu,

you should perhaps start by describing your configuration, the endpoints involved, where FS is involved (T38-relay or T38-gateway or pure TDM), etc...

David Ponzone  Direction Technique
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 26/05/2011 à 07:54, Mathieu Lautram a écrit :

Hi all,

After sending faxes (it works very well know, thanks to Anthony Minessale) , sometimes I've got errors like that:

- Disconnected after permitted retries
- No response after sending a page
- Received a DCN from remote after sending a page
- Received bad response to DCS ot TCF
- The call dropped prematurely
- Timed out waiting for initial communication

Those faxes are about 25% of all faxes that I send. I'm using the last git version.
Where this problem comes from? Is there a way to fix this?
I know that sometimes the remote end could be broken or could be an old fax machine, but it seems strange that I have so many errors like that.

Thank you for your help :-)

--
Mathieu LAUTRAM
Application developer

BJT Partners - FRANCE
+33 1 79 75 99 60
+33 6 61 59 07 25


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org




--
Mathieu LAUTRAM
Application developer

BJT Partners - FRANCE
+33 1 79 75 99 60
+33 6 61 59 07 25
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org