Hi

Using spandsp_start_fax_detect instead tone_detect doesn't work.

I have the latest git head.

My dialplan works whit tone_detect.


<extension name="2103">
<condition field="destination_number" expression="^2103$">
<!--
<action application="answer"/>
<action application="tone_detect" data="fax 1100 r +3000 transfer 2103_rxfax XML default"/>
<action application="sleep" data="3000"/>
-->
<action application="pre_answer"/>
<action application="spandsp_start_fax_detect" data="transfer '2103_rxfax XML default' 3"/>
<action application="sleep" data="3000"/>
<action application="set" data="ringback=%(1500,3000,425.0)"/>
<action application="bridge" data="[leg_timeout=60]user/2103@domain.com"/>
</condition>
</extension>


<extension name="2103_rxfax">
<condition field="destination_number" expression="^2103_rxfax$">
<action application="answer"/>
<action application="playback" data="silence_stream://3000"/>
<action application="lua" data="rxfax.lua ${user_data(2103@domain.com var faxbox)} domain.com"/>
</condition>
</extension>






On Mon, 2011-08-29 at 13:13 -0500, Anthony Minessale wrote: 
there is a specific app for fax detecting inside mod spandsp called
spandsp_start_fax_detect


it takes about the same input args namely <app> [<arg>][ <timeout>]
It uses the official fax identification code inside spandsp and works
much better than the single tone detect way.



On Mon, Aug 29, 2011 at 12:59 PM, Michael Collins <msc@freeswitch.org> wrote:
> If you need multiple tone detects then definitely use the first method. I've
> done as many as 6 tone_detects on a single call and it works well.
> -MC
>
> On Sun, Aug 28, 2011 at 1:13 PM, Rob Hutton <justlikeef@gmail.com> wrote:
>>
>> I am trying to get tone detection set up so that a single number can be
>> used for both voice and fax.  Tone detection needs to run concurrent to the
>> normal call processing, so that a call proceeds normally unless the fax
>> tones are heard.
>>
>> On this wiki page
>> (http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_fax_detect) it gives
>> the format:
>>
>> <action application="tone_detect" data="fax 1100 r +5000 transfer fax XML
>> default" />
>>
>> and an associated dialplan entry for the call to be transfered to that
>> actually handles the fax reception.
>>
>> On this wiki page
>> (http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_tone_detect) it says
>> that the format from the first page is not the preferred method, and that
>> the format should be something like:
>>
>> <action application="set" data="execute_on_tone_detect=transfer fax XML
>> default"/>
>> <action application="set" data="tone_detect_hits=1"/>
>> <action application="set" data="execute_on_media=tone_detect mytone 1100 r
>> +5000"/>
>>
>> My question is, using the first format, I could set up multiple
>> detections, eg. one for fax tones that sends/receives a fax, one for
>> answering machines tone that hangs up, etc.
>>
>> Is this possible with the preferred syntax?
>>
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users@lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>





-- 

Un cordial saludo / Best regards, 

 _________________________

António Silva

E-mail:asilva@wirelessmundi.com