2010-01-06 11:42:49.907861 [ERR] zap_io.c:2562 Error loading
/usr/local/freeswitch/mod/ozmod_sangoma_boost.so [/usr/local/freeswitch/mod/ozmod_sangoma_boost.so: cannot
open shared object file: No such file or directory]
2010-01-06
11:42:49.907883 [ERR] zap_io.c:2722 can't find
'sangoma_boost
2010-01-06
11:42:49.907902 [ERR] mod_openzap.c:2379 Error starting
OpenZAP span 1 error
2010-01-06
11:42:49.907929 [CONSOLE] switch_loadable_module.c:890
Successfully Loaded [mod_openzap]
Do you know why I would get this? Where is the
ozmod_sangoma_boost.so file supposed to come
from?
Thanks,
Jerry
When I
attempt an internal-to-PSTN call, there are no Q931 packets sent out the
PRI (I confirmed this using the Sangoma wanpipemon utility). I
suspect this has something to do with my XML
configuration. Below are
my openzap/wanpipe configurations (which should all be defaulted). Do you seen anything wrong with these
defaults, which might cause the following FS console
error?
zap_io.c:1197
outgoing_call method not
implemented!
openzap.conf:
[span wanpipe smg_prid]
name =>
smg_prid
trunk_type =>t1
b-channel =>
1:1-23
autoload_configs/openzap.conf.xml:
<configuration
name="openzap.conf" description="OpenZAP
Configuration">
<settings>
<param name="debug" value="9"/>
<!--<param name="hold-music"
value="$${moh_uri}"/>-->
<!--<param
name="enable-analog-option"
value="call-swap"/>-->
<!--<param
name="enable-analog-option" value="3-way"/>-->
</settings>
<boost_spans>
<span
id="smg_prid">
<!--<param
name="hold-music" value="$${moh_uri}"/>-->
<param
name="dialplan" value="XML"/>
<param
name="context" value="default"/>
<!-- regex to
stop dialing when it matches -->
<!--<param
name="dial-regex" value="5555"/>-->
<!-- regex to
stop dialing when it does not match -->
<!--<param
name="fail-dial-regex" value="^5"/>-->
</span>
</boost_spans>
<analog_spans>
</analog_spans>
</configuration>
wanpipe.conf:
[defaults]
codec_ms => 20
wink_ms =>
150
flash_ms => 750
Thanks and Best Regards,
Jerry
On Mon, Jan 4, 2010 at 3:49 PM, Jerry Richards
<jerry.richards@teotech.com> wrote:
Hello,
I have one FS instance that is
working well with a PRI and running FS
version 1.0.5pre9.
Originally, it was running FS version 1.0.4 and I
then
upgraded it.
Now, I am trying to bring up another FS
instance (basically a clone of the
first), but the PRI does not
work. When I attempt to make an
internal-to-PSTN call, I get
a "502 Bad Gateway" reply. I verified that
both servers are
using the latest Sangoma Wanpipe driver, and I copied the
conf XML
file tree from the old server to the new one. I think the
problem
has to do with the openzap module, but I'm having
difficulty isolating the
problem. Could it have built the
openzap module incorrectly? Another
difference is that I
installed 1.0.5pre9 from scratch on the new server
(i.e. it never
had 1.0.4 running on it).
I put the FS log into the pastebin
when an outbound call attempt is made:
http://pastebin.freeswitch.org/11675
Could
someone give me a pointer on what to try next?
Jerry, I noticed this
line:
(OpenZAP/1:1/3491028@g1)
Is
your carrier wanting full ten digit phone numbers? Try
adding the area code on this and see what happens. The error usually
would be something like "invalid number format" but I've seen carriers
do stupid things like this. Try that first and see if it makes a
difference. If not you'll need to turn on Q931 debugging as per the
Sangoma wiki. (See
http://wiki.freeswitch.org/wiki/OpenZAP#Debugging_PRI_With_wanpipemon
for the
link.)
-MC