Hi, and thanks in advance for your help.
I run freeswitch with a SangomA A102
(FXO/FXS) card. The freeswitch code base that it is running
on is about 3 months old. It is a production server, and
taking it down other than in the middle of the night is
problemsome... It is running on Debian Lenny.
In the next couple of days I am going to be
spending the night, doing a fresh install of the latest debian
(squeeze) at which time I will do a fresh GIT, fresh sangoma
wanpipe and be totally current on FreeSwitch.
My Question:
I am having intermittent problems with my
FXO/FXS ports. Basically I have fax machines attached. Every
so often (sometimes 5-10 days in between), the fax machine
says that it has no dial tone. I am able to resolve the
problem by going to the CLI and unloading mod_freetdm and then
reloading mod_freetdm. When the “no dialtone problem” is
happening, unloading mod_freetdm takes 10 seconds or so…I have
even had it crash freeswitch during the unload…
I haven’t attempted to narrow down the
issue yet, and thought I might ask for some guidance before
heading down that path.
One of my thoughts is that perhaps the
Hardware is bad, but the fact that unloading/loading
mod_freetdm fixes it makes me think it is something in
mod_freetdm…
Your thoughts?
-Frank