Maybe in testing, but in production you kinda need to know what you can change live... reloadxml does the dialplan, reload mod_x does that mod, and "sofia $profile killgw $gw" I think kills that gateway, then you can do a rescan..
I fully shut it down freeswitch, and then started it up again (I've
found that the time wasted doing a complete shutdown is more than
offset by the hours you can waste trying to figure out why your
changes don't take effect ;-)
)
On 06/12/11 22:01, Avi Marcus wrote:
Did you kill and restart the gateway after adding
the variable? (Or restart the entire interface, or restart FS?)
Michael, I'm familiar with the info application, and
have been using this to test my progress. It's gotten
me a long way, but not past this hurdle.
Avi, I tried that, or at least my interpretation of
that, and it didn't work.
I found the gateway in question - it's one of only two
references to the trunk - in sip_profiles/. The
declaration, including my addition of the variables
clause, looks like this:
I then called in via that interface, using a DDI, with
the info application. I got lots of information, but
neither foo nor bar. I did change the direction from
"inbound" to "both", to make it as likely as possible
to work.
The log output I got had lots of stuff in it (see http://pastebin.freeswitch.org/17943
) but no foo, no bar, and no trunk_1. It did have
several occurrences of the ip address of talk2,
10.10.9.1, but that can change. I also see several
references to the ip address (10.10.10.149) and sofia
profile name (sipinterface_3), but all gateways will
be on the same profile.
Hmm, gateways on the wiki should be
cleaned up.. I couldn't find it on the wiki,
only via google.
-Avi
On Tue, Dec 6,
2011 at 12:45 AM, Michael Collins <msc@freeswitch.org>
wrote:
Try adding
one of these to the dialplan that
handles inbound calls:
<action
application="info"/>
Then, watch the console while an
inbound comes in and you'll see
quite a lot of information. Anything
in that info dump is available to
you for "figuring out" what's going
on. If you have any questions then
drop that info output to a pastebin
and give us the URL here.