hi,

I'am using freeswitch 1.7.0+git~20151119T221015Z~9e0f30c58b~64bit (git 9e0f30c 2015-11-19 22:10:15Z 64bit) on ubuntu 14.04

I have configured webrtc with ws and vedio (mod_vpx). video calls working properly through the extensions

then i try to configure video conference with following configurations

dial-plane

 <extension name="cdquality_conferences">

      <condition field="destination_number" expression="^5555$">

        <action application="answer"/>

        <action application="conference" data="$1-${domain_name}@video-mcu-stereo"/>

      </condition>

    </extension>

conference.conf.xml

 <profile name="video-mcu-stereo">

      <param name="domain" value="$${domain}"/>

      <param name="rate" value="48000"/>

      <param name="channels" value="2"/>

      <param name="interval" value="20"/>

      <param name="energy-level" value="200"/>

      <!-- <param name="tts-engine" value="flite"/> -->

      <!-- <param name="tts-voice" value="kal16"/> -->

      <param name="muted-sound" value="conference/conf-muted.wav"/>

      <param name="unmuted-sound" value="conference/conf-unmuted.wav"/>

      <param name="alone-sound" value="conference/conf-alone.wav"/>

      <param name="moh-sound" value="local_stream://stereo"/>

      <param name="enter-sound" value="tone_stream://%(200,0,500,600,700)"/>

      <param name="exit-sound" value="tone_stream://%(500,0,300,200,100,50,25)"/>

      <param name="kicked-sound" value="conference/conf-kicked.wav"/>

      <param name="locked-sound" value="conference/conf-locked.wav"/>

      <param name="is-locked-sound" value="conference/conf-is-locked.wav"/>

      <param name="is-unlocked-sound" value="conference/conf-is-unlocked.wav"/>

      <param name="pin-sound" value="conference/conf-pin.wav"/>

      <param name="bad-pin-sound" value="conference/conf-bad-pin.wav"/>

      <param name="caller-id-name" value="$${outbound_caller_name}"/>

      <param name="caller-id-number" value="$${outbound_caller_id}"/>

      <param name="comfort-noise" value="false"/>

      <param name="conference-flags" value="rfc-4579|livearray-sync|livearray-json-status|video-muxing-personal-canvas|video-required-for-canvas"/>

      <param name="video-mode" value="mux"/>

      <param name="video-layout-name" value="3x3"/>

<!--      <param name="video-layout-name" value="group:grid"/>-->

      <param name="video-canvas-size" value="1920x1080"/>

      <param name="video-canvas-bgcolor" value="#333333"/>

      <param name="video-layout-bgcolor" value="#000000"/>

      <param name="video-codec-bandwidth" value="1mb"/>

      <param name="video-fps" value="15"/>

    </profile>

When I call the conference number, i got error on console as.

"[ERR] mod_vpx.c:675 VPX encode error 8:Invalid parameter:Image size must match encoder init configuration size"

looking for advice to solve this.

--

Best Regards..
Achintha

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org