2010-01-06 11:42:49.907861 [ERR] zap_io.c:2562 Error loading
/usr/local/freeswitch/mod/ozmod_sangoma_boost.so [/usr/local/freeswitch/mod/ozmod_sangoma_boost.so: cannot
open shared object file: No such file or directory]
2010-01-06
11:42:49.907883 [ERR]
zap_io.c:2722 can't find
'sangoma_boost
2010-01-06
11:42:49.907902 [ERR]
mod_openzap.c:2379 Error starting OpenZAP span 1 error
2010-01-06
11:42:49.907929 [CONSOLE] switch_loadable_module.c:890
Successfully Loaded [mod_openzap]
Do you know why I would get this? Where is the
ozmod_sangoma_boost.so file supposed to come from?
Thanks,
Jerry
When I attempt
an internal-to-PSTN call, there are no Q931 packets sent out the PRI (I
confirmed this using the Sangoma wanpipemon utility). I suspect this
has something to do with my XML configuration. Below are my openzap/wanpipe configurations
(which should all be defaulted). Do you
seen anything wrong with these defaults, which might cause the following FS
console error?
zap_io.c:1197
outgoing_call method not
implemented!
openzap.conf:
[span wanpipe smg_prid]
name =>
smg_prid
trunk_type =>t1
b-channel =>
1:1-23
autoload_configs/openzap.conf.xml:
<configuration
name="openzap.conf" description="OpenZAP
Configuration">
<settings>
<param name="debug" value="9"/>
<!--<param
name="hold-music" value="$${moh_uri}"/>-->
<!--<param name="enable-analog-option"
value="call-swap"/>-->
<!--<param
name="enable-analog-option" value="3-way"/>-->
</settings>
<boost_spans>
<span
id="smg_prid">
<!--<param
name="hold-music" value="$${moh_uri}"/>-->
<param
name="dialplan" value="XML"/>
<param
name="context" value="default"/>
<!-- regex to
stop dialing when it matches -->
<!--<param
name="dial-regex" value="5555"/>-->
<!-- regex to
stop dialing when it does not match -->
<!--<param
name="fail-dial-regex" value="^5"/>-->
</span>
</boost_spans>
<analog_spans>
</analog_spans>
</configuration>
wanpipe.conf:
[defaults]
codec_ms => 20
wink_ms =>
150
flash_ms => 750
Thanks and Best Regards,
Jerry
On Mon, Jan 4, 2010 at 3:49 PM, Jerry Richards
<jerry.richards@teotech.com> wrote:
Hello,
I have one FS instance that is
working well with a PRI and running FS
version 1.0.5pre9.
Originally, it was running FS version 1.0.4 and I then
upgraded
it.
Now, I am trying to bring up another FS instance (basically a
clone of the
first), but the PRI does not work. When I attempt
to make an
internal-to-PSTN call, I get a "502 Bad Gateway" reply.
I verified that
both servers are using the latest Sangoma
Wanpipe driver, and I copied the
conf XML file tree from the old
server to the new one. I think the problem
has to do with the
openzap module, but I'm having difficulty isolating the
problem.
Could it have built the openzap module incorrectly?
Another
difference is that I installed 1.0.5pre9 from scratch
on the new server
(i.e. it never had 1.0.4 running on it).
I
put the FS log into the pastebin when an outbound call attempt is
made:
http://pastebin.freeswitch.org/11675
Could
someone give me a pointer on what to try next?
Jerry, I noticed this
line:
(OpenZAP/1:1/3491028@g1)
Is
your carrier wanting full ten digit phone numbers? Try
adding the area code on this and see what happens. The error usually would
be something like "invalid number format" but I've seen carriers do stupid
things like this. Try that first and see if it makes a difference. If not
you'll need to turn on Q931 debugging as per the Sangoma wiki. (See
http://wiki.freeswitch.org/wiki/OpenZAP#Debugging_PRI_With_wanpipemon
for the
link.)
-MC