Hi,
Yes, you pointed out to the exact result that I reached. In outbound calls Freeswitch puts correct (public) IP in SDP. But in a inbound call Freeswitch receives INVITE from a local router / firewall (Mikrotik).

The trace shows that the INVITE received from for example 192.168.10.1 (router's local IP address) ( Freeswitch's private IP is 192.168.10.58) although I have public address of my client in Via, Contact and SDP portion of INVITE message. It obvious that Freeswitch selects it's local IP address for SDP portion of it's 200 OK. My question is WHY? :)

It knows that is on a NAT session so uses it's public address in Contact header. How can I change Freeswitch's behavior ? How can I give the INVITE message to Freeswitch that does not show it receives from a local IP?

BEST,

Afshin


On Mon, Aug 18, 2014 at 6:38 AM, Miguel Oyarzo <miguelaustro@gmail.com> wrote:
Hi,
When I told you about ACL, it  was because this is a normal misunderstanding.
ACL helps to determinate what is considered as a local and external address.

Have you checked if the INVITE arrives with an IP address within your local network?
If so, that will produce a 200 OK response with an local IP into the SDP message .

use tcpdump, ngrep or any other tool to determinate IP addresses involved in your scenario.

Regard,




On Sun, Aug 17, 2014 at 3:26 PM, afshin afzali <a.afzali2003@gmail.com> wrote:
mod_commands.c:642 nat_map API called while NAT not initialized

Is that my problem?


On Sat, Aug 16, 2014 at 9:15 PM, afshin afzali <a.afzali2003@gmail.com> wrote:
Appreciate that,
You used stun protocol to detect external IP address although I'm using the exact address so I think it makes no difference. 

I would appreciate if I know in which conditions FreeSWITCH uses public IP address in SDP protocol.


On Saturday, August 16, 2014, Douglas Adami <webmaster.rumodigital@gmail.com> wrote:
Hi Afshin,

I have the same scenario as you and 100% functional, this is my setup.

<X-PRE-PROCESS cmd="set" data="external_rtp_ip=stun:stun.freeswitch.org"/>
<X-PRE-PROCESS cmd="set" data="external_sip_ip=stun:stun.freeswitch.org"/>

<param name="apply-nat-acl" value="nat.auto"/>

<param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
<param name="ext-sip-ip" value="$${external_sip_ip}"/>

I'm new around here, so let's wait for a response from some expert. 

good settings

Doug


On Sat, Aug 16, 2014 at 2:02 PM, afshin afzali <a.afzali2003@gmail.com> wrote:
Hi Douglas,

Thanks for your reply,
I)
 
In my scenario both of FreeSWITCH and client are behind the firewall.

II)
 
<X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/>
<X-PRE-PROCESS cmd="set" data="external_rtp_ip=X.Y.Z.W"/>
<X-PRE-PROCESS cmd="set" data="external_sip_ip=X.Y.Z.W"/>

I have a static public IP (for Freeswitch) and I know what it is so I specified it explicitly.

Do I have to set bind_server_ip to a specific IP in case of NAT traversal as I specified local IP addresses for sip and rtp?

III)
in the SIP profile
<param name="sip-ip" value="192.168.10.59"/>
<param name="rtp-ip" value="192.168.10.59"/>
<param name="ext-sip-ip" value="X.Y.Z.W"/>
<param name="ext-rtp-ip" value="X.Y.Z.W"/>
for apply-nat-acl I examined nat.auto, rfc1918, ... :(

I did not refer to external_sip_ip / external_rtp_ip vaiables in the SIP profile and explicitly defined external static IP.


BEST,

Afshin



On Sat, Aug 16, 2014 at 5:01 PM, Douglas Adami <webmaster.rumodigital@gmail.com> wrote:
Hi,

NAT scenario, correct?

try this:

vars.xml
<X-PRE-PROCESS cmd="set" data="bind_server_ip=my.domain.com"/>
<X-PRE-PROCESS cmd="set" data="external_sip_ip=stun:stun.freeswitch.org"/>
<X-PRE-PROCESS cmd="set" data="external_rtp_ip=stun:stun.freeswitch.org"/>


sip_profiles:

sipinterface_1.xml
<param name="apply-nat-acl" value="nat.auto"/>
<param name="ext-sip-ip" value="$${external_sip_ip}"/>
<param name="ext-rtp-ip" value="$${external_rtp_ip}"/> 

Doug


On Sat, Aug 16, 2014 at 7:26 AM, afshin afzali <a.afzali2003@gmail.com> wrote:
Hi Miguel,

I do not understand how the ACL (if you mean apply-nat-acl) can effects on using public IP in SDP when I specified both ext-sip-ip and ext-rtp-ip in sip profile!
I changed the apply-nat-acl to a "always allow" and "rfc1918" but does not make difference.

Afshin


On Thu, Aug 14, 2014 at 3:18 PM, Miguel Oyarzo <miguelaustro@gmail.com> wrote:

Wrong ACL?


On Wed, Aug 13, 2014 at 10:06 PM, afshin afzali <a.afzali2003@gmail.com> wrote:
Hi FreeSWITCHers:

I configured a sip profile as bellow:

=================================================================================================
Name                    sipinterface_1
Domain Name             N/A
Auto-NAT                false
DBName                  sofia_reg_sipinterface_1
Pres Hosts      
Dialplan                XML
Context                 context_1
Challenge Realm         auto_to
RTP-IP                  192.168.10.59
Ext-RTP-IP              X.Y.Z.W
SIP-IP                  192.168.10.59
Ext-SIP-IP               X.Y.Z.W
URL                     sip:mod_sofia@X.Y.Z.W:5060
BIND-URL                sip:mod_sofia@X.Y.Z.W:5060;maddr=192.168.10.59;transport=udp,tcp
HOLD-MUSIC              N/A
OUTBOUND-PROXY          N/A
CODECS IN               G722,PCMU,PCMA,GSM
CODECS OUT              G722,PCMU,PCMA,GSM
TEL-EVENT               101
DTMF-MODE               rfc2833
CNG                     13
SESSION-TO              0
MAX-DIALOG              0
NOMEDIA                 false
LATE-NEG                false
PROXY-MEDIA             false
ZRTP-PASSTHRU           false
AGGRESSIVENAT           true
CALLS-IN                0
FAILED-CALLS-IN         0
CALLS-OUT               0
FAILED-CALLS-OUT        0
REGISTRATIONS           1

for every INVITE that comes in via this profile, FS replys with this SDP:
  
   v=0
   o=FreeSWITCH 1407905843 1407905844 IN IP4 192.168.10.59
   s=FreeSWITCH
   c=IN IP4 192.168.10.59
   t=0 0
   m=audio 25142 RTP/AVP 0 101
   a=rtpmap:0 PCMU/8000
   a=rtpmap:101 telephone-event/8000
   a=fmtp:101 0-16
   a=ptime:20

Although the Contact header of 200 OK is correct :
Contact: <sip:4000@X.Y.Z.W:5060;transport=udp>


Appreciate all comments,
-- Afshin

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org




--
"Efficiency is doing things right; effectiveness is doing the right things (Peter Drucker)"

Miguel Oyarzo
DevOps & VoIP Engineer
Linux User: # 483188 - counter.li.org
http://au.linkedin.com/in/mikeaustralia 
Melbourne, Australia

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com


FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com



_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



--
"Efficiency is doing things right; effectiveness is doing the right things (Peter Drucker)"

Miguel Oyarzo
DevOps & VoIP Engineer
Linux User: # 483188 - counter.li.org
http://au.linkedin.com/in/mikeaustralia 
Melbourne, Australia

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org