>From my understanding the break is used to handle what happens on the evaluation of the condition. I have break=never as I want it to try all rules for the extension even if the one above returns true or false.
----- Original Message -----
From: David Ponzone <david.ponzone@gmail.com>
Date: Monday, June 28, 2010 6:36 am
Subject: Re: [Freeswitch-users] Dialplan handling on call fails
To: freeswitch-users@lists.freeswitch.org
> If you use continue_on_fail, I don't think you need to set
> break="never".
>
> David Ponzone Direction Technique
> email: david.ponzone@ipeva.fr
> tel: 01 74 03 18 97
> gsm: 06 66 98 76 34
>
> Service Client IPeva
> tel: 0811 46 26 26
> www.ipeva.fr - www.ipeva-studio.com
>
> Ce message et toutes les pièces jointes sont confidentiels et
> établis
> à l'intention exclusive de ses destinataires. Toute utilisation
> ou
> diffusion non autorisée est interdite. Tout message électronique
> est
> susceptible d'altération. IPeva décline toute responsabilité
> au
> titre de ce message s'il a été altéré, déformé ou falsifié.
> Si
> vous n'êtes pas destinataire de ce message, merci de le
> détruire
> immédiatement et d'avertir l'expéditeur.
>
>
>
>
> Le 26/06/2010 à 16:53, Roger Salloum a écrit :
>
> > Hi,
> >
> > I'm trying to setup a dialplan such that if one particular
> route
> > fails it will try another. However, I do not want it to
> try another
> > route once it had recieved a 180/183 in response from a
> gateway. I
> > have not been able to determine how to accomplish this.
> >
> > For Example:
> >
> > <condition field="destination_number"
> expression="^(1000123.*)$"
> > break="never">
> > <action
> application="set" data="hangup_after_bridge=true"/>
> > <action application="set"
> > data="continue_on_fail=RECOVER_ON_TIMER_EXPIRE"/>
> > <action
> application="bridge" data="sofia/gateway/carrier1/$1"/>
> > </condition>
> >
> > <condition field="destination_number"
> expression="^(1000.*)$"
> > break="never">
> > <action
> application="set"
> > data="hangup_after_bridge=RECOVER_ON_TIMER_EXPIRE"/>
> > <action
> application="bridge" data="sofia/gateway/carrier2/$1"/>
> > </condition>
> >
> > <condition field="destination_number"
> expression="^(1.*)$"
> > break="never">
> > <action
> application="set" data="hangup_after_bridge=true"/>
> > <action application="set"
> > data="continue_on_fail=RECOVER_ON_TIMER_EXPIRE"/>
> > <action application="bridge"
> data="sofia/gateway/carrier3/$1"/>> </condition>
> >
> > So when 10001234567 is dialled i will match all 3. I'd like to
> be
> > able to try 1, if failed, try 2, if failed try 3. All calls go
> out
> > via an outbound proxy.
> >
> > Using the above examples if the gateway does not respond in
> time,
> > the proxy generates a 408 REQUEST TIMEOUT error message. It
> will
> > then fail out and try the next route. However, when the
> gateway
> > responds with a 180/183 but there is no answer after 2 minutes
> the
> > proxy, will generate a 480 NO ANSWER (also tried a 408
> REQUEST
> > TIMEOUT ). When Freeswitch receives this message it fails, and
> then
> > attempts the third failure route. How do i prevent the
> dialplan from
> > continuing once it has received a 180/183 when no one answers
> the
> > phone?
> >
> > Thanks,
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users@lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>