Ive Tried the following with no success:
internal.xml
<param name="ext-rtp-ip" value="75.101.142.208"/>
<param name="ext-sip-ip" value="75.101.142.208"/>
Ive also tried just changing the vars.xml file. I also tried
forwarding the incoming rtp connections to my test pc. all with no
audio success. I am sure im doing something wrong I jsut cant find
it.
I found another suggestion on the wiki of creating a "double nat"
that listens on 5090. That didnt change anything either, here is
that information:
<settings>
<param name="debug" value="0"/>
<param name="sip-trace" value="no"/>
<param name="rfc2833-pt" value="101"/>
<param name="sip-port" value="5090"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
<param name="dtmf-duration" value="100"/>
<param name="codec-prefs" value="$${outbound_codec_prefs}"/>
<param name="hold-music" value="$${hold_music}"/>
<param name="use-rtp-timer" value="true"/>
<param name="rtp-timer-name" value="soft"/>
<param name="manage-presence" value="false"/>
<param name="aggressive-nat-detection" value="true"/>
<param name="inbound-codec-negotiation" value="generous"/>
<param name="nonce-ttl" value="60"/>
<param name="auth-calls" value="false"/>
<param name="rtp-timeout-sec" value="1800"/>
<param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
<param name="ext-sip-ip" value="$${external_sip_ip}"/>
<param name="rtp-timeout-sec" value="300"/>
<!--<param name="enable-3pcc" value="true"/>-->
<!-- TLS: disabled by default, set to "true" to enable -->
<param name="tls" value="false"/>
<!-- additional bind parameters for TLS -->
<param name="tls-bind-params" value="transport=tls"/>
<!-- Port to listen on for TLS requests. (5061 will be used if
unspecified)$
<param name="tls-sip-port" value="5081"/>
<!-- Location of the agent.pem and cafile.pem ssl certificates
(needed for $
<param name="tls-cert-dir" value="$${base_dir}/conf/ssl"/>
<!-- TLS version ("sslv23" (default), "tlsv1"). NOTE: Phones may
not work w$
<param name="tls-version" value="tlsv1"/>
</settings>
Maybe someone can see what is going on here.
Thanks,
Damon
-----Original Message-----
From: "Brian West" <brian@freeswitch.org>
Sent: Friday, September 5, 2008 6:57pm
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] SIP, NAT and Amazon EC2
You'll have to set an ext-sip-ip and ext-rtp-ip on the internal.xml
profile on ec2 duplicate them from the external profile.
/b
On Sep 5, 2008, at 8:47 PM, Damon Brown wrote:
Yes, I have all of the valid posts open on my security group
-d
Brian West
sip:brian@freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org