> <
nazim.aghabayov@gmail.com <mailto:
nazim.aghabayov@gmail.com>> wrote:
>
> Hello Venkat,
>
> Below is my working configuration for q931 euro-isdn.
> Please have a look at:
>
http://wiki.sangoma.com/wanpipe-freeswitch-config
> &&
http://wiki.sangoma.com/wanpipe-pri-daemon-options
>
>
> openzap.conf
> ---------------------------------
> [span wanpipe PRI_1]
> name => PRI_1
> number => 1
> trunk_type => e1
> b-channel => 1:1-15
> b-channel => 1:17-31
>
>
> openzap.conf.xml
> -----------------------------------
> <configuration name="openzap.conf" description="OpenZAP
> Configuration">
> <settings>
> <param name="debug" value="0"/>
> </settings>
> <boost_spans>
> <span name="PRI_1">
> <!-- Log Levels: none, alert, crit, err, warning, notice,
> info, debug -->
> <param name="q921loglevel" value="alert"/>
> <param name="q931loglevel" value="debug"/>
> <param name="mode" value="user"/>
> <param name="dialect" value="q931"/>
> <param name="dialplan" value="XML"/>
> <param name="context" value="default"/>
>
> <!-- my mystical telco, they insisting on TON = NPI = 0 -->
> <param name="outbound-called-ton" value="unknown"/>
> <param name="outbound-called-npi" value="unknown"/>
> <param name="outbound-rdnis-ton" value="unknown"/>
> <param name="outbound-rdnis-npi" value="unknown"/>
> <param name="outbound-calling-ton" value="unknown"/>
> <param name="outbound-calling-npi" value="unknown"/>
> </span>
> </boost_spans>
> </configuration>
>
>
> dialplan
> ---------------
> <extension name="priout">
>
> <condition field="destination_number"
> expression="(?!4970000)\d{7}">
>
> <action application="set"
> data="effective_caller_id_number=4970000"/>
> <action application="set"
> data="effective_caller_id_name=4970000"/>
>
> <action application="bridge"
> data="openzap/PRI_1/a/${destination_number}@g1"/>
>
> </condition>
> </extension>
>
> Best Regards,
> Nazim
>
>
> On 07/19/2010 01:36 PM, ovvenkat wrote:
> > Hi to all,
> >
> > I am very new to this world. I am not able to do outbound
> call using
> > Sangoma A101 card and freeSwitch.
> >
> > Here is the procedure I have followed
> >
> > *openzap.conf*
> >
> > [span wanpipe smg_prid]
> > name => smg_prid
> > trunk_type =>e1
> > b-channel => 1:1-15
> > d-chennel => 1:16
> > b-channel => 1:17-31
> >
> > I have one span in *openzap.conf.xml*
> >
> > <configuration name="openzap.conf" description="OpenZAP
> Configuration">
> > <settings>
> > <param name="debug" value="0"/>
> > </settings>
> > <boot_spans>
> > <span id="smg_prid"/>
> > <param name="node" value="cpe"/>
> > <param name="switch" value="ni1">
> > <param name="dialplan" value="XML">
> > <param name="context" value="default">
> > </span>
> > <boot_spans>
> > <analog_spans>
> > </analog_spans>
> > </configuration >
> > </analog_spans>
> >
> > *My Dial plan is
> >
> > *added one extension in default.xml file
> >
> > <extension name="outgoing-pri">
> > <condition field="destination_number" expression="12345">
> > <action application="bridge" data="OpenZAP/smg_prid/a/<my
> number>@g1"/>
> > </condition>
> > </extension>
> >
> > When i trying to call "12345" I am getting following output
> in *fs_cli* ,
> >
> > 2010-07-19 01:50:17.531933 [DEBUG] sofia.c:5992 IP 192.168.1.100
> > Rejected by acl "domains". Falling back to Digest auth.
> > 2010-07-19 01:50:17.562934 [DEBUG] sofia.c:5992 IP 192.168.1.100
> > Rejected by acl "domains". Falling back to Digest auth.
> > 2010-07-19 01:50:17.581933 [NOTICE] switch_channel.c:776 New
> Channel
> > sofia/internal/
1000@192.168.1.110