Any chance of some sample CISCO and/or FreeSwitch configs?

 

You can send to my email if you can’t post public.

 

 

Thanks all,

 

Oliver



 

 

From: Ognjen Seslija [mailto:oseslija@gmail.com]
Sent: 16/05/11 16:46
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] CISCO FXO cards with FreeSwitch

 

I have working SIP trunks from CCME 4.3 to FS, if that's what you mean.

On Mon, May 16, 2011 at 7:08 AM, Schenk, Oliver <OSchenk@wnr.com.au> wrote:

Hey,

 

I was wondering if anyone out there in the FreeSwitch community has successfully used FXO cards (e.g. VIC2-4FXO) in a CISCO router (e.g. 2811) with FreeSwitch.

 

Was this achieved via SIP communication between the CISCO and FreeSwitch?

 

Any documentation out there? I can’t seem to find much for FreeSwitch regarding what would need to be done on the FreeSwitch end.

 

 

 

Regards,

 

Oliver Schenk

 


NOTICE - This e-mail and any files transmitted with it are confidential and are only for the use of the person to whom they are addressed.
If you are not the intended recipient then you have received this e-mail in error; please advise us immediately if this is the case.
Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of WestNet Rail.


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 


NOTICE - This e-mail and any files transmitted with it are confidential and are only for the use of the person to whom they are addressed.
If you are not the intended recipient then you have received this e-mail in error; please advise us immediately if this is the case.
Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of WestNet Rail.