Hi Mike,
Thanks for your help.
Manually loading mod_openzap fails. It looks like there is something wrong with my udev rules not changing permission of the /dev/wanpipe files.
freeswitch@internal> load mod_openzap
-ERR [module load file routine returned an error]
2010-02-26 12:24:26.807413 [DEBUG] zap_config.c:56 Configuration file is /opt/teoswitch/conf/modules.conf.
freeswitch@internal> 2010-02-26 12:24:26.807413 [NOTICE] zap_io.c:2778 Modules configured: 1
2010-02-26 12:24:26.807413 [DEBUG] zap_config.c:56 Configuration file is /opt/teoswitch/conf/openzap.conf.
2010-02-26 12:24:26.807413 [DEBUG] zap_io.c:2362 found config for span
2010-02-26 12:24:26.807413 [INFO] zap_io.c:2579 Loading IO from /opt/teoswitch/mod/ozmod_wanpipe.so [wanpipe]
2010-02-26 12:24:26.807413 [DEBUG] zap_config.c:56 Configuration file is /opt/teoswitch/conf/wanpipe.conf.
2010-02-26 12:24:26.807413 [INFO] zap_io.c:2379 auto-loaded 'wanpipe'
2010-02-26 12:24:26.807413 [DEBUG] zap_io.c:2400 created span 1 (smg_prid) of type wanpipe
2010-02-26 12:24:26.807413 [DEBUG] zap_io.c:2413 span 1 [name]=[smg_prid]
2010-02-26 12:24:26.807413 [DEBUG] zap_io.c:2413 span 1 [trunk_type]=[t1]
2010-02-26 12:24:26.817864 [DEBUG] zap_io.c:2417 setting trunk type to 'T1'
2010-02-26 12:24:26.817864 [DEBUG] zap_io.c:2413 span 1 [b-channel]=[1:1-23]
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 1
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 2
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 3
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 4
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 5
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 6
2010-02-26 12:24:26.817864 [ERR] ozmod_wanpipe.c:233 Failed to open wanpipe device span 1 channel 7
Here is what /dev/wan* looks like after udev changes:
[root@roberth-c53 bin]# ls -l /dev/wan*
crw------- 1 root root 242, 0 Feb 26 11:24 /dev/wanec
crw------- 1 root root 241, 2080 Feb 26 11:24 /dev/wanpipe
crw------- 1 root root 241, 1 Feb 26 11:24 /dev/wanpipe1_if1
crw------- 1 root root 241, 10 Feb 26 11:24 /dev/wanpipe1_if10
crw------- 1 root root 241, 11 Feb 26 11:24 /dev/wanpipe1_if11
crw------- 1 root root 241, 12 Feb 26 11:24 /dev/wanpipe1_if12
CUT A FEW LINES
crw------- 1 root root 241, 34 Feb 26 11:24 /dev/wanpipe2_if2
crw------- 1 root root 241, 35 Feb 26 11:24 /dev/wanpipe2_if3
crw------- 1 root root 241, 36 Feb 26 11:24 /dev/wanpipe2_if4
crw------- 1 root root 241, 2112 Feb 26 11:24 /dev/wanpipe_ctrl
crw------- 1 root root 241, 2144 Feb 26 11:24 /dev/wanpipe_logger
crw------- 1 root root 241, 2368 Feb 26 11:24 /dev/wanpipe_timer0
I made and installed the wanpipe driver as root, is that part of the problem?
Thanks again,
Robert
From: Michael Collins [mailto:msc@freeswitch.org]
Sent: Friday, February 26, 2010 11:28 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] Cannot make calls through PRI via wanpiperunning as daemon
On Thu, Feb 25, 2010 at 5:16 PM, Robert Hadley <robert.hadley@teotech.com> wrote:
When running Freeswitch as service called teoswitch as user teoswitch I cannot make calls through the Sangoma PRI or analog cards using wanpipe driver. I have added a file called 30-wanpipe.rules to /etc/udev/rules.d and rebooted the server.
cat 30-wanpipe.rules
# /etc/udev/rules.d/30-wanpipe.rules
SUBSYSTEM=="wptdm", OWNER="teoswitch", GROUP="teoswitch", MODE="0660"
SUBSYSTEM=="wanpipe", OWNER="teoswitch", GROUP="teoswitch", MODE="0660"
I also tried adding:
SUBSYSTEM=="wanec", OWNER="teoswitch", GROUP="teoswitch", MODE="0660"
Freeswitch log:
Dialplan: sofia/internal/5410@192.168.72.45:5060 parsing [default->SangomaPRI] continue=false
Dialplan: sofia/internal/5410@192.168.72.45:5060 Regex (PASS) [SangomaPRI] destination_number(93491045) =~ /^9(\d+)$/ break=on-false
Dialplan: sofia/internal/5410@192.168.72.45:5060 Action set(effective_caller_id_number=425740${caller_id_number})
Dialplan: sofia/internal/5410@192.168.72.45:5060 Action bridge(openzap/smg_prid/a/3491045@g1)
2010-02-25 16:51:11.328635 [DEBUG] switch_core_state_machine.c:122 (sofia/internal/5410@192.168.72.45:5060) State Change CS_ROUTING -> CS_EXECUTE
2010-02-25 16:51:11.328635 [DEBUG] switch_core_session.c:1019 Send signal sofia/internal/5410@192.168.72.45:5060 [BREAK]
2010-02-25 16:51:11.328635 [DEBUG] switch_core_state_machine.c:341 (sofia/internal/5410@192.168.72.45:5060) State ROUTING going to sleep
2010-02-25 16:51:11.328635 [DEBUG] switch_core_state_machine.c:314 (sofia/internal/5410@192.168.72.45:5060) Running State Change CS_EXECUTE
2010-02-25 16:51:11.328635 [DEBUG] switch_core_state_machine.c:348 (sofia/internal/5410@192.168.72.45:5060) State EXECUTE
2010-02-25 16:51:11.328635 [DEBUG] mod_sofia.c:181 sofia/internal/5410@192.168.72.45:5060 SOFIA EXECUTE
2010-02-25 16:51:11.328635 [DEBUG] switch_core_state_machine.c:159 sofia/internal/5410@192.168.72.45:5060 Standard EXECUTE
EXECUTE sofia/internal/5410@192.168.72.45:5060 set(effective_caller_id_number=4257405410)
2010-02-25 16:51:11.328635 [DEBUG] mod_dptools.c:811 sofia/internal/5410@192.168.72.45:5060 SET [effective_caller_id_number]=[4257405410]
EXECUTE sofia/internal/5410@192.168.72.45:5060 bridge(openzap/smg_prid/a/3491045@g1)
2010-02-25 16:51:11.339637 [ERR] switch_core_session.c:357 Could not locate channel type openzap
2010-02-25 16:51:11.339637 [ERR] switch_ivr_originate.c:2411 Cannot create outgoing channel of type [openzap] cause: [CHAN_NOT_IMPLEMENTED]
2010-02-25 16:51:11.339637 [DEBUG] switch_ivr_originate.c:3209 Originate Resulted in Error Cause: 66 [CHAN_NOT_IMPLEMENTED]
2010-02-25 16:51:11.339637 [INFO] mod_dptools.c:2346 Originate Failed. Cause: CHAN_NOT_IMPLEMENTED
CHAN_NOT_IMPLEMENTED implies that OpenZAP did not load. Capture the output of "load mod_openzap" and look for the reason that it is failing to load.
-MC
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org