You're right, I had quite a bit wrong.  This is very helpful.

Exporting sip_call_id works.  Thanks!

- Jeff

On Wed, Aug 21, 2013 at 9:53 AM, Steven Ayre <steveayre@gmail.com> wrote:

They didn't seem to have any effect - I still saw a new SIP callid on the b-leg INVITE

Perhaps you're misunderstanding the purpose of them.

Every channel in FreeSWITCH has a UUID. On a bridge you have two different channels (inbound & outbound). Their UUIDs -must- be different, to tell them apart.

The setting you found sets the UUID from the Call-ID on the inbound channel, and visa versa for the outbound channel. That mostly makes it easier to match up packet traces to calls, and your CDRs to a customers (since they know the Call-ID but not your internal UUID).

If you set both the UUID of the incoming channel will be the incoming Call-ID, the outgoing UUID will be generated by FreeSWITCH and the outgoing Call-ID will match the outgoing UUID. You cannot set the same UUID for both.

Have you tried exporting the sip_call_id variable from the aleg to the bleg? I don't know if that variable is read-only though. If sofia will read from that should be sufficient, you won't need to tweak the UUIDs of the channels.

If that doesn't work you could also try setting origination_uuid to sip_call_id in the bridge dialstring, along with the outgoing parameter you found.

-Steve

On 21 August 2013 13:21, Jeff Pyle <jpyle@fidelityvoice.com> wrote:

I was afraid of that on the inbound side.  It makes sense.

The short answer is sometimes I want full topology-hiding, other times I want the same SIP callid all the way through.  Managing it per-profile could work.  It has to do with correlating voice-quality monitoring on the private side with other measurements from the public side.  In cases where this happens, the same callid on both sides makes things much, much easier.

Yesterday I tried enabling both inbound-use-callid-as-uuid and outbound-use-uuid-as-callid on both the public and private profiles.  They didn't seem to have any effect - I still saw a new SIP callid on the b-leg INVITE.  I wasn't sure how to debug it from there.

- Jeff

On Wed, Aug 21, 2013 at 6:17 AM, Steven Ayre <steveayre@gmail.com> wrote:

It would be too late for inbound in the dialplan as the channel already exists, therefore already has a uuid. Though you can change the uuid, you'd still have issues whenever a call hung up so quickly it never reached the dialplan (yes, I've seen that happen).

Outbound you may have a chance with - but I don't know if such a variable exists.

Is there a reason you can't just set it on the profile?

On Tuesday, August 20, 2013, Jeff Pyle wrote:

Hello,

Is it possible to set the equivalent of inbound-use-uuid-as-callid or outbound-use-uuid-as-callid per channel from within the dialplan?

- Jeff

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org