For reference, what I did was took the phone's provisioning xml file (ie. SEP<MAC_ADDRESS>.cnf.xml and added this to create a second line:
<line button="2">
<featureID>9</featureID>
<featureLabel>Nodephone Voicemail</featureLabel>
<proxy>203.2.134.1</proxy>
<port>5060</port>
<name>MY DID NUMBER</name>
<displayName>MY DID NUMBER</displayName>
<autoAnswer>
<autoAnswerEnabled>2</autoAnswerEnabled>
</autoAnswer>
<callWaiting>3</callWaiting>
<authName>MY DID NUMBER</authName>
<authPassword>MY PASSWORD</authPassword>
<sharedLine>false</sharedLine>
<messageWaitingLampPolicy>3</messageWaitingLampPolicy>
<messagesNumber>MY DID NUMBER</messagesNumber>
<ringSettingIdle>4</ringSettingIdle>
<ringSettingActive>5</ringSettingActive>
<contact>MY DID NUMBER</contact>
<forwardCallInfoDisplay>
<callerName>true</callerName>
<callerNumber>false</callerNumber>
<redirectedNumber>false</redirectedNumber>
<dialedNumber>true</dialedNumber>
</forwardCallInfoDisplay>
</line>
This still seems like an odd configuration to me, as you have a FreeSWITCH user (in my case, 1001) who can dial out this trunk and receive calls in from it on the phone's first line, but cannot monitor the voice mail on that same server.
I'm guessing that there is something more fundamental in the FreeSWITCH configuration here.
On 4 July 2013 12:18, Jeremy Moschner
<jeremy.moschner@gmail.com> wrote:
Thanks Chris
I'll give that a try soon and see if it works.
JOn 28 June 2013 15:22, Chris Ferreira
<chris@gonumina.com> wrote:
I'm not all that familiar with Internode, but I would think you could also have the handset register one of the other "lines" to an extension on Internode that's tied to the VM box. I could see this working on VoIP.ms which I'm familiar with.
___________________
Mobile Reply
Hi Everyone
I am running an embedded FreeSWITCH installation (on OpenWRT, opkg version 1.0.7-2) and have a single Cisco 7970G that registers fine and can make and recieve calls (most of the time).
However, one of my SIP providers (Internode) also offers a voicemail system (useful if I have my phone turned off and means I don't have to run a voicemail module on my installation).
What I would like to find out is if it is possible for the 7970G (or indeed any other endpoint) to query/receive notification from Internode's voicemail system and display a MWI (or some sort of notification on the phone) when a message is there.
Now, from my reading, I believe that this is accomplished through either SIP NOTIFY or SUBSCRIBE messages, but I am still quite confused about how it all works. I am unsure if FreeSWITCH needs to "relay" this information to the endpoint, or if is configurable via the MWI-Account parameter (ie. the directory user registers to receive these updates directly from the SIP server).
I imagine I'll need to provide a bit more detail, so please let me know where to start.
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org