Hi,

I have configured A200 and able to receive incoming calls. I am unable to dial out.

Here are the logs.

2011-12-08 16:39:15.990089 [DEBUG] ftmod_analog.c:62 [s3c1][2:1] Changed state from DOWN to DIALING
2011-12-08 16:39:15.990089 [DEBUG] ftmod_analog.c:439 [s3c1][2:1] ANALOG CHANNEL thread starting.
2011-12-08 16:39:15.990089 [DEBUG] ftmod_analog.c:459 [s3c1][2:1] Initialized DTMF detection
2011-12-08 16:39:15.990089 [DEBUG] ftmod_analog.c:640 [s3c1][2:1] Completed state change from DOWN to DIALING in 0ms
2011-12-08 16:39:15.990089 [DEBUG] ftmod_analog.c:646 [s3c1][2:1] Executing state handler on 3:1 for DIALING
2011-12-08 16:39:21.009503 [DEBUG] ftmod_analog.c:505 [s3c1][2:1] Changed state from DIALING to BUSY
2011-12-08 16:39:21.030044 [DEBUG] ftmod_analog.c:640 [s3c1][2:1] Completed state change from DIALING to BUSY in 20ms
2011-12-08 16:39:21.030044 [DEBUG] ftmod_analog.c:646 [s3c1][2:1] Executing state handler on 3:1 for BUSY
2011-12-08 16:39:21.030044 [DEBUG] ftmod_analog.c:802 [s3c1][2:1] Changed state from BUSY to DOWN
2011-12-08 16:39:21.049928 [DEBUG] ftmod_analog.c:640 [s3c1][2:1] Completed state change from BUSY to DOWN in 20ms
2011-12-08 16:39:21.049928 [DEBUG] ftmod_analog.c:646 [s3c1][2:1] Executing state handler on 3:1 for DOWN
2011-12-08 16:39:21.049928 [DEBUG] ftmod_analog.c:944 [s3c1][2:1] Going onhook2011-12-08 16:39:21.049928 [DEBUG] switch_core_state_machine.c:362 (FreeTDM/3:1/9449905000) Running State Change CS_HANGUP

Here is our dial plan

        <extension name="outgoing_bsnl">
                <condition field="destination_number" expression="^9(\d{10})$">
                        <action application="bridge" data="freetdm/3/a/$1"/>
                </condition>
        </extension>

I suspect FS is not detecting the dial tone on analogue channel. BTW, outgoing on our digital span works fine.

Any suggestions?

Thanks,

Ryan