Thanks I'll try that out. I assume its internal profile only?

Internal is just a profile in the example vanilla config. You can have any number of profiles you like, with any name.

My advice goes for any profile where the bind (ie local on the server) address and external (ie seen by the sip client) address are the same.

Also -nonat is just an argument right when launching freeswitch.exe

Yes. You'll still want the nat support if any of your profiles are behind NAT.

On 15 October 2013 13:03, Andre Demattia <andretodd@verizon.net> wrote:

Thanks I'll try that out. I assume its internal profile only?
Also -nonat is just an argument right when launching freeswitch.exe

From: Steven Ayre
Sent: 10/15/2013 6:29 AM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] multiple sip profiles

You duplicate the entire <profile> tag, usuallly found in /etc/freeswitch/sip_profiles

A profile is binds to a single sip-ip and sip-port combination. You want to change the IP, port, or both on the new profile. rtp-ip *can* be the same, but is probably best matching the sip-ip (on a multihomed server you then know the media's taking the same working route that the signalling is).

Also on a real server with a static IP should I also remove auto-nat?

I don't use any nat stuff on a public IP. I have no ext-*-ip params set, which means they default to using the sip-ip and rtp-ip values.

I also start freeswitch with the -nonat flag (in the init.d script) which lets it start up much faster as it doesn't bother autodetecting your non-existent NAT router.

-Steve

On 15 October 2013 00:40, Andre <andretodd@verizon.net> wrote:

What values need to be changed to create multiple sip profiles?
Let's say my box has 2 IP's and I want only some traffic on one IP.

In Internal I see these fields, should I change these to my other IP?

<param name="rtp-ip" value="$${local_ip_v4}"/>
<param name="sip-ip" value="$${local_ip_v4}"/>
<param name="ext-rtp-ip" value="auto-nat"/>
<param name="ext-sip-ip" value="auto-nat"/>
<param name="sip-port" value="5062"/>

Also on a real server with a static IP should I also remove auto-nat?
Thanks

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org