Hello,

I tried to test the behavior of "bypass media" in FS with the following scenario: Xlite(ext.1000) -> FS <- Xlite(ext:1001)

On each Xlite I set one single codec (that is currently unsupported by FS) as it said in wiki page: "This is useful if you have two end-points that need to use a codec that is currently not supported in FreeSWITCH "

As the FS tutorial said "Before executing the bridge action you must set the "bypass_media" flag to true. " so I put the following line in my dial plan.

<extension name="extension-intercom">
    <condition field="destination_number" expression="1001">
        <action application="set" data="bypass_media=true"/>
        <action application="bridge" data="user/1001"/>
    </condition>
</extension>


<extension name="extension-intercom">
    <condition field="destination_number" expression="1000">
        <action application="set" data="bypass_media=true"/>
        <action application="bridge" data="user/1000"/>
    </condition>
</extension>

When I put in Xlite also G711ulaw/alaw as codecs preference the calls was ok. But when I put only codecs that FS do not support(ex. iLBC,BroadVoice32) the call failed. What am I missing?

I made this scenario because I need to route via FS some calls with G729r8 codec and I need no codec negotiation.

Ty

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org