Peter,
  Here is my rtmp.conf.xml:

<configuration name="rtmp.conf" description="RTMP Endpoint">
  <profiles>
    <profile name="default">
        <settings>
            <param name="bind-address" value="0.0.0.0:1935" />
            <param name="context" value="public" />
            <param name="dialplan" value="XML" />
            <!-- If this is set to true, no unauthenticated inbound calls will be allowed -->
            <param name="auth-calls" value="true" />
            <!-- How much time should the clients buffer the media stream (miliseconds) -->
            <param name="buffer-len" value="50" />
            <!-- Sets the maximum size of outbound RTMP chunks -->
            <param name="chunksize" value="512" />
        </settings>
    </profile>
  </profiles>
</configuration>

It is important to specify the context and then make sure you have a condition in your corresponding dial plan that will catch your call.

Jack



On 8/7/2012 1:11 AM, Peter Steinbach wrote:
Hello Jack,

here are some answers to your your questions:


Make sure you use a fully qualified username not just the extension
1001@xxx.xxx.xxx.xxx >the XXX would be the IP of your FreeSwitch Server.

I am still in the "connect" state, I am not logging in yet. The webpage
tells me "Connecting... " and waits forever


did you configure your rtmp.conf.xml and have a matching context in

your dial plan?
I am still in the "connect" state

In the web page make sure these two vars are set to YOUR Freeswitch
server ip: var rtmpIPURL =

"rtmp://xxx.xxx.xxx.xxx/phone"; var rtmpIP="xxx.xxx.xxx.xxx";

I did not have a rtmpIP var, so I added it to the code, but no change.

In fact as I can see while grepping the network traffic, the Flex app
and Freeswicth are negociating their protocol and freeswitch logs a
"Sent connect reply", but this is very diferent from what is sent from
the conference.freeswitch.org server.

Best regards
Peter


On 08/07/12 06:26, Jack wrote:

Hi Peter,
Make sure you use a fully qualified username not just the extension 
1001@xxx.xxx.xxx.xxx
the XXX would be the IP of your FreeSwitch Server.

did you configure your rtmp.conf.xml and have a matching context in your 
dial plan?

In the web page make sure these two vars are set to YOUR Freeswitch 
server ip:
var rtmpIPURL = "rtmp://xxx.xxx.xxx.xxx/phone";
  var rtmpIP="xxx.xxx.xxx.xxx";

jack

On 8/6/2012 5:44 PM, Peter Steinbach wrote:

Hello,

today I tried the flex client with the mod_rtmp implementation.
On a brandnew freeswitch I installed mod_rtmp and copied the flex
direrectory to a web server and loaded the web page.

However the flex client does not connect:
Here's my freeswitch log
2012-08-07 02:32:03.585671 [NOTICE] mod_rtmp.c:744 New RTMP session
[f35a192c-0d02-4320-89e9-775a3573ee25]
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:702 Sent handshake response
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:727 Done with handshake
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=3 type=0x14
ts=0 stream_id=0x0] len=342
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:170 [amfnumber=3] Got INVOKE
for connect
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x1
stream_id=0x0] len=4
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x5
stream_id=0x0] len=4
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x6
stream_id=0x0] len=5
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=2 type=0x4
stream_id=0x0] len=6
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14
stream_id=0x0] len=201
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:566 [amfnumber=3 type=0x14
stream_id=0x0] len=61
2012-08-07 02:32:03.685670 [NOTICE] rtmp_sig.c:121 Sent connect reply
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:892 [chunk_stream=2 type=0x5
ts=12247364 stream_id=0x0] len=4
2012-08-07 02:32:03.685670 [DEBUG] rtmp.c:945 Set window size: 131072 bytes

If I change the rtmp_url to 'rtmp://conference.freeswitch.org/phone',
flex does connect.

But in my freeswitch this fails. I have traced the network traffic and I
can see that there is information flow between freeswitch and the client
on connect request.

Somebody has an idea where to look further?


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

Join Us At ClueCon - Aug 7-9, 2012

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

Join Us At ClueCon - Aug 7-9, 2012

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org