Hi Mike
let me make it clear :)
ip phone1 (ext 1000) registers to SIP server
ip phone2 (ext 1002) registers to SIP server
FS (ext 1003) register to SIP server
the media proxy and sip server are in the same server
the signaling flow :
ext1000 ---> INVITE ---> SIP server ---> INVITE---> ext 1002
the media flow:
ext1000 ----RTP ------>media proxy(sip server)----RTP----->ext1002
so the signaling for FS when i call 1003
step1: ext1000--->INVITE--->Sip
server---->INVITE---->FS
step2: ext1000 press 1002, FS will transfer call to SIP server
signaling flow for step 2:
1. FS --->INVITE ---> SIP server---->INVITE--->ext1000 - to put ext1000 on hold
2. FS --->INVITE---> SIP server----> INVITE--->ext1002
when FS gets 200ok from ext1002 then FS --->refer--->Sip server--->ext1000 - FS does the call transfer
3. ext1000 connected to ext1002
media flow:
step1: ext1000----RTP---media proxy----RTP---FS
step2:
1. FS -----no RTP---media proxy----no RTp----ext1000
2. FS----RTP----media proxy---ext1002
3 ext1000----media proxy----ext1002
Thank
you
Từ: Michael Jerris <mike@jerris.com>
Đến: freeswitch-users@lists.freeswitch.org
Gửi ngày: 11:23:25, Thứ Hai, 26 tháng 4 2010
Chủ đề: Re: [Freeswitch-users] need help on IVR
I meant this literally. People always use the term "sip server" and I never understand what they are trying to say. What exactly is a sip server? I think you have your terms all completely confused in your explanation below or I am just being really dense. This cisco server is a sip server
and a media proxy? Can you try to be very clear on what exactly these things are and what you are trying to do?
Mike
On Apr 25, 2010, at 10:44 PM, false wrote:
Hi Michael Jerris
my sip server is cisco sip server
could you guide me some clue or show the same config for the case
Thank you
Ha`
Từ: Michael Jerris <mike@jerris.com>
Đến: freeswitch-users@lists.freeswitch.org
Gửi ngày: 1:08:26, Chủ nhật, 25 tháng 4 2010
Chủ đề: Re: [Freeswitch-users] need help on IVR
what is a sip server? Yes, you can do pretty much anything like this.
On Apr 19, 2010, at 12:08 AM, false wrote:
Hi all
my network
topology:
endpoint 1(100)-----sip server ---IVR(Freeswitch)
|
|
endpoint2(101)
endpoint1 + endpoint2 are registered to sip server
Freeswitch is regsitered to sip server with 103
my wish is when endpoint 1 calls to freeswitch then endpoint 1 hear IVR
and RTP from endpoint 1 --> media proxy---> FS
then endpoint1 press 101, freeswitch will send INVITE 101 to sip server via call transfer feature of FS
and RTP from endpoint1--> media proxy
-->endpoint1, RTP will not go through the FS after FS transfer call to 101
can FS do it