[span wanpipe wp1]
trunk_type => e1
group=dialGrp1
b-channel => 2:1-15
b-channel => 2:17-31
d-channel => 2:16

[span wanpipe wp2]
trunk_type => e1
group=dialGrp1
b-channel => 1:1-15
b-channel => 1:17-31
d-channel => 1:16

freetdm/dialGrp1/a/xxxxx initiates call from channel 1 of span 2 i.e. (2:1)

freetdm/dialGrp1/A/xxxxx initiates call from channel 31 of span 2 i.e. (2:31)..  but i was expecting it to be 31st channel of Span1.

Also 2nd question in above config all calls are going through wp1(span2) only.. even if i initiate more than 30 calls simultaneously.. no call goes to wp2(span 1)

Can anyone please help how can i make ascending/descending channel utilization using one single group across both above spans..

Thanks a lot..

FS Rocks.

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org