Sorry for the delayed response, got tied up in other things.  A quick recap. I can dial from my call manager to Freeswitch but cannot dial from freeswitch to call manager.

I wasn't sure what you meant by setting the ext-sip-ip and ext-rtp-ip.  So I replaced the auto-nat with local-network-acl.  I'll always be on the internal network so should never need the nat.

I saw in the acl.conf.xml that it automatically populates all my local subnets.  The networks are correct under the domains of the acl.conf.

I'm not sure where else to look.  Any help would be greatly appreciated.

Thanks so much,

Mitch

On Jul 19, 2011, at 11:29 PM, freeswitch-users-request@lists.freeswitch.org wrote:

From: Brian West <brian@freeswitch.org>
Subject: Re: [Freeswitch-users] One way calling issue over an internal trunk
Date: July 19, 2011 8:55:02 PM EDT
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Reply-To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>


you need to set the ext-sip-ip and ext-rtp-ip and deal with setting local-network-acl to the proper network/mask because you're answering with RFC1918 media IP's to the cisco… its retarded and will just start sending to those IP's and they'll usually never make it back to you.

/b

On Jul 19, 2011, at 7:16 PM, Mitch Johnson wrote:

I have a connection between my FreeSWITCH and a Cisco CallManager:

This is from the default.xml

<extension name="Dial to CM8">
     <condition field="destination_number" expression="^(800\d)$">
       <action application="bridge" data="sofia/internal/$1@172.16.200.100"/>
     </condition>
    </extension>