The version of freeswitch is 1.2 stableFreeSWITCH Version 1.2.11+git~20130704T172759Z~667a8d8868 (git 667a8d8 2013-07-04 17:27:59Z)
On Thu, Jul 4, 2013 at 10:33 PM, arun sethi <asethi168@gmail.com> wrote:I am trying to send fax to a local fax machine (Canon MX 512) on my LAN using freeswitch. The machine is connected via linksys pap2 (ATA) on LAN to freeswitch.the command I am using on freeswitch console is:/usr/local/freeswitch/bin/fs_cli -x "originate {fax_verbose=true,ignore_early_media=true,absolute_codec_string='PCMU'}user/1006 &txfax(/tmp/txfax.tiff)"The machine in question is Canon Mx 512 in fax only mode. Note that I am able to send out fax from this machine and receive it in freeswitch using rxfax. The problem is only in sending fax to this machine using txfax.The complete error log is at paste http://pastebin.freeswitch.org/21151Here are some relevant snippets from error log2013-07-04 21:23:09.215751 [DEBUG] mod_sofia.c:243 sofia/internal/sip:1006@10.2.2.159:8081 SOFIA EXECUTE2013-07-04 21:23:09.215751 [DEBUG] switch_core_state_machine.c:209 sofia/internal/sip:1006@10.2.2.159:8081 Standard EXECUTEEXECUTE sofia/internal/sip:1006@10.2.2.159:8081 txfax(/tmp/txfax.tiff)2013-07-04 21:23:09.215751 [DEBUG] mod_spandsp_fax.c:1387 Raw read codec activation Success L16 300002013-07-04 21:23:09.215751 [DEBUG] switch_core_codec.c:219 sofia/internal/sip:1006@10.2.2.159:8081 Push codec L16:702013-07-04 21:23:09.215751 [DEBUG] mod_spandsp_fax.c:1403 Raw write codec activation Success L162013-07-04 21:23:09.265748 [DEBUG] switch_rtp.c:3706 Correct ip/port confirmed.2013-07-04 21:23:09.265748 [DEBUG] switch_core_io.c:759 Engaging Read Buffer at 480 bytes vs 1602013-07-04 21:23:09.475748 [WARNING] mod_sofia.c:1279 Asynchronous PTIME not supported, changing our end from 30 to 202013-07-04 21:23:09.475748 [DEBUG] sofia_glue.c:3037 Changing Codec from PCMU@30ms@8000hz to PCMU@20ms@8000hz2013-07-04 21:23:09.535748 [DEBUG] switch_rtp.c:1873 RE-Starting timer [soft] 160 bytes per 20ms2013-07-04 21:23:09.535748 [DEBUG] sofia_glue.c:3124 Set Codec sofia/internal/sip:1006@10.2.2.159:8081 PCMU/8000 20 ms 160 samples 64000 bits2013-07-04 21:23:09.555751 [DEBUG] switch_core_io.c:1365 Engaging Write Buffer at 320 bytes to accommodate 480->3202013-07-04 21:23:12.095748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Carrier up (-2) in state T2013-07-04 21:23:15.095748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Carrier down (-1) in state T2013-07-04 21:23:15.155748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Carrier up (-2) in state T2013-07-04 21:23:15.195750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.235749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.275748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.315750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.355748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.395748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.635748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.715751 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.795749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:15.915751 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal s**** repeats many times ****2013-07-04 21:23:47.035750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:48.115755 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Abort (-8) in state T2013-07-04 21:23:48.135749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC signal status is Carrier down (-1) in state T2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 T0 expired in state T2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Status changing to 'Timed out waiting for initial communication'2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Disconnecting2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Changing from phase A_CNG to E2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set rx type 02013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set tx type 12013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Changing from state T to B2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Send complete in phase E, state B2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:511 ==============================================================================2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:524 Fax processing not successful - result (2) Timed out waiting for initial communication.2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:529 Remote station id:2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:530 Local station id: SpanDSP Fax Ident2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:531 Pages transferred: 02013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:533 Total fax pages: 02013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:534 Image resolution: 0x02013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:535 Transfer Rate: 144002013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:537 ECM status off2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:538 remote country:2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:539 remote vendor:2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:540 remote model:2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:542 ==============================================================================2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Changing from state B to CALL_FINISHED2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Changing from phase E to CALL_FINISHED2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set rx type 92013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX FAX exchange complete2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set tx type 92013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX FAX exchange complete2013-07-04 21:23:50.215748 [DEBUG] switch_core_codec.c:244 sofia/internal/sip:1006@10.2.2.159:8081 Restore previous codec PCMU:0.2013-07-04 21:23:50.215748 [NOTICE] switch_core_state_machine.c:262 sofia/internal/sip:1006@10.2.2.159:8081 has executed the last dialplan instruction, hanging up.