5080 for "external" profile means for creating outbound connections to a gateway, or for allowing incoming un-authed calls.
This question about "remote" login was referring to a login from outside the local network, which should be going to the internal profile.

-Avi

On Sun, Jan 30, 2011 at 12:15 AM, Steven Ayre <steveayre@gmail.com> wrote:
a) according to Wiki, you should set port 5080 for remote connections


That's for the default config and entirely depends on what you have configured. There is absolutely no reason it *must* be 5080.

Steve on iPhone

On 28 Jan 2011, at 23:15, Kenan BEKTAS <bektas@yahoo.com> wrote:

a) according to Wiki, you should set port 5080 for remote connections.
b) if no sound for some reason, then, it is most likely a RTP issue. Make sure RTP port ranges is open on your router.

---
Kenan
www.dbstreams.ca




--- On Fri, 1/28/11, Joao Leme <joaocarlosleme@gmail.com> wrote:

From: Joao Leme <joaocarlosleme@gmail.com>
Subject: Re: [Freeswitch-users] Remote LogIn to Freeswitch?
To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org>
Date: Friday, January 28, 2011, 5:31 PM

FINALLY I got it to work, I can now remotely log in on the internal profile (port 5060) after placing the computer running Freeswitch on DMZ (changed on Firewall), although that's not the ideal solution, so I was wondering why it wasn't working before. I had the firewall set up according to the wiki on "http://wiki.freeswitch.org/wiki/Firewall" and other than that I changed the "domain" on vars.xml to my external ip of the router, it created an ALIAS so that I can use as the "Domain" on X-lite to log on. So I had the internal profile mod_sofia@192.168.X.XX:5060 and the Alias 76.XXX.XX.XX, that was before and I was able to LogIn, make calls but NO SOUND. NOW once I forwarded all the port through DMZ, this particular router 2701HG-B Gateway (Att) required me to change my (freeSwitch running computer) static ipv4 (192.XXX.X.XX) to DHCP and then assigned me the external IP (76.XXX.XX.XX) as my a Ipv4. Now the internal profile (sofia status) is mod_sofia@76.XXX.XX.XX:5060 and I'm not using the ALIAS.

SO...I was wondering...it wasn't working before because 1) A Firewall configuration missing? 2) A NAT/Firewall problem or 3) Freeswitch internal profile running on local machine ipv4 192..... and I logging on using the router external IP 76.XX and the Alias didn't do the job????? 

Sorry there is some nonsense question, I'm a beginner and any help is appreciated.
Thanks,
John

On Tue, Jan 11, 2011 at 1:37 AM, Steven Ayre <steveayre@gmail.com> wrote:
If you're able to dial in but you're getting no sound, it's probably
NAT stopping the audio get through.

There's quite a bit of information on NAT on the Wiki that might be of use.

http://wiki.freeswitch.org/wiki/NAT

-Steve


On 11 January 2011 00:39, Joao Leme <joaocarlosleme@gmail.com> wrote:
> Hi There,
> What do I have to do to be able to LogIn to Freeswitch from Home (server is
> located at office) starting from the basic/original configuration?
> I'm using X-Lite. I've been able to LogIn replacing the internal IP by the
> external IP from the Office but the sound is not working so I wanted to know
> what are the configuration changes that have to be done to allow it. Do I
> have to create a different profile? I want be able to do the same just as if
> I was at the Office.
> Thanks,
> John


-----Inline Attachment Follows-----



_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org