My log is here - http://pastebin.freeswitch.org/22265

And my sangoma codec is loaded. As I told from ulaw if i call, its goes to voicemessage, eventhough the extension is available and it uses sangoma card. 

And yes my RTP Address shows as,

freeswitch@internal>  sangoma_codec settings

        RTP IP Address: 192.168.2.1

Its different segment from my inbuilt Ethernet address. 

Regards.

On Mon, Mar 31, 2014 at 7:51 PM, Deon Vermeulen <vermeulen.deon@gmail.com> wrote:

Hmm….

Can you confirm this:

/usr/local/freeswitch/conf/autoload_configs/modules.conf.xml

    <!-- Endpoints -->
    <!-- <load module="mod_dingaling"/> -->
    <!-- <load module="mod_portaudio"/> -->
    <!-- <load module="mod_alsa"/> -->
    <load module="mod_sofia"/>
    <load module="mod_sangoma_codec"/>
    <load module="mod_loopback"/>
    <!-- <load module="mod_woomera"/> -->
    <!-- <load module="mod_freetdm"/> -->
    <!-- <load module="mod_openzap"/> -->
    <!-- <load module="mod_unicall"/> -->
    <!-- <load module="mod_skinny"/> -->
    <!-- <load module="mod_khomp"/>   -->
    <!-- <load module="mod_rtmp"/>   -->

    <!-- Codec Interfaces -->
    <load module="mod_spandsp"/>
    <!-- <load module="mod_g723_1"/> -->
    <!-- <load module="mod_g729"/> -->
    <!-- <load module="mod_amr"/> -->
    <!-- <load module="mod_ilbc"/ > -->
    <!-- <load module="mod_speex"/> -->
    <!-- <load module="mod_h26x"/> -->
    <!-- <load module="mod_vp8"/> -->
    <!-- <load module="mod_b64"/> -->
    <!-- <load module="mod_siren"/> -->
    <!-- <load module="mod_isac"/> -->
    <!-- <load module="mod_celt"/> -->
    <!-- <load module="mod_opus"/> -->

Although I think this is something else.

Please paste call output from fs_cli to pastebin.com and share with us the link.

Regards

D

On Mar 31, 2014, at 4:13 PM, Gopalakrishnan N <gopalakrishnan.an@gmail.com> wrote:

@Deon: nope, I tried but it didn't push through. 

As I said from G729 if i initiate a call it says 488 Unacceptable error. 

From ulaw if i initiate the call, its going to voicemail even though the extension is available. 

While going to voicemail it uses sangoma,

freeswitch@internal> sangoma_codec sessions

Session    Codec      Enc        Dec        Enc Tx     Enc Rx     Dec Tx     Dec Rx     Enc Lost   Dec Lost   Enc AvgRxMs     Dec AvgRxMs

5          PCMU       Yes        No         149        146        0          0          129        0          80              0

4          PCMU       No         No         0          0          0          0          0          0          0               0

3          PCMU       No         No         0          0          0          0          0          0          0               0

2          PCMU       No         No         0          0          0          0          0          0          0               0

1          PCMU       No         No         0          0          0          0          0          0          0               0

0          PCMU       No         No         0          0          0          0          0          0          0               0

Total sessions: 6

very strange. 

On Mon, Mar 31, 2014 at 7:38 PM, Gopalakrishnan N <gopalakrishnan.an@gmail.com> wrote:

@Guillermo: Yes I have my sngtc_server loaded. 

@Deon, Let me try as per your dialplan. 

On Mon, Mar 31, 2014 at 7:33 PM, Deon Vermeulen <vermeulen.deon@gmail.com> wrote:

This is how we have it setup:

/usr/local/freeswitch/conf/vars.xml

  <X-PRE-PROCESS cmd="set" data="global_codec_prefs=Sangoma G729,G722,PCMU,PCMA,GSM"/>

  <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=Sangoma G729,PCMU,PCMA,GSM,G722"/>


AND


/usr/local/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml

<configuration name="sangoma_codec.conf" description="Sangoma Codec Configuration">

        <settings>
                <!-- Please check http://wiki.sangoma.com/sangoma-media-transcoding for documentation on the supported options -->
                <param name="register" value="g729,pcma,pcmu,gsm"/>
        </settings>

</configuration>

On Mar 31, 2014, at 3:11 PM, Gopalakrishnan N <gopalakrishnan.an@gmail.com> wrote:

> I have a Sangoma Transcoding Card installed in FreeSWITCH.
>
> And my configuration is fine, and my vars.xml file I have like this,
>
>  <X-PRE-PROCESS cmd="set" data="global_codec_prefs=Sangoma G729,G722,PCMU,PCMA,GSM"/>
>   <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=Sangoma G729,PCMU,PCMA,GSM"/>
>
>
> Now in one end I have ulaw and alaw and in other end I have G729, when I try to dial from G729 to other end I get 488 error (Codec error).
>
> Even though I have Sangoma Transcoding card still it shows error.
>
>
> Thanks.

> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting@freeswitch.org
> http://www.freeswitchsolutions.com
>
> FreeSWITCH-powered IP PBX: The CudaTel Communication Server
> http://www.cudatel.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users@lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org