Grant,

I believe you might be looking in the wrong place for information. I would start here:
http://wiki.freeswitch.org/wiki/FreeTDM

Note that if you are using a Digium-compatible card then you will need to install the DAHDI drivers first and make sure that part is working. (If you are able to run dahdi_tool and see your ports then you've got the DAHDI stuff done and can move on to the FreeTDM setup.)

-MC

On Thu, Oct 28, 2010 at 6:03 AM, Grant Gray <grant@mrit.co.za> wrote:

 

Hi All,

 

I am trying to get a digium TDM410 card to work. I have looked at the following tutorials:

 

http://wiki.sangoma.com/wanpipe-linux-drivers

http://wiki.sangoma.com/wanpipe-api-freetdm-linux

 

and a few others.

 

The problem I am having is that this command does nothing:

 

export FREETDM_MOD_DIR=/usr/local/freetdm

 

it does not create the directory as required. Is this normal on Centos or is there another command?

 

I also tried this command of one of the forum posts:

 

make dahdi DAHDI_DIR=/usr/src/dahdi (http://wiki.sangoma.com/Topic-1273333936389)

 

I poked around further and found that the export –p command shows that the command is there:

 

declare -x FREETDM_MOD_DIR="/usr/local/freetdm"

 

So, I am wondering why its not working. I also cannot find a command like /sbin/export so i am lost.

 

what I am really trying to achieve is the installation of the tdm410 card on freeswitch. Any tutorials would be really great.

 

Regards,

 

Gigg

 


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org