I was installing this setup:
The problem is, the client 1008 calls the client 1010 and the client 1010 do answer.
The signaling part is connected successfully.
But client 1008 and 1010 show the black video field only and voice is don’t working too.
In the wireshark trace on the freeswitch host I can see, the freeswitch received from the client 1008 and 1010 the rtp streams, but he send the streams not to the other side. I can’t see any outbound rtp streams.
The only one error message in the CLI output is:
2016-08-26 11:37:59.642048 [ERR] switch_core_session.c:511 Could not locate channel type
FreeSWITCH Version 1.6.9-16-d574870~64bit (-16-d574870 64bit) on Debian 8.5
The config is default with the adapted IPs
What can I do to locate the Problem?
Von: freeswitch-users-bounces@
lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] Im Auftrag von Alexander Haugg
Gesendet: Donnerstag, 25. August 2016 14:39
An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org >
Betreff: Re: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main
Thanks a lot, that’s the solution.
Von: freeswitch-users-bounces@
lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] Im Auftrag von Marcel Haldemann
Gesendet: Mittwoch, 24. August 2016 18:03
An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org >
Betreff: Re: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main
If u start to play with webrtc and Freeswitch I’d recommend to install FS + cert + verto communicator using the script here:
note: change hostname and ip in the script.
Then just go to “https://yourhostname.com/vc” and you should have a working verto server and client.
Note: change the default password to get rid of the 10 sec delay or remove the delay in the dial plan.
Von: freeswitch-users-bounces@
lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] Im Auftrag von Alexander Haugg
Gesendet: Mittwoch, 24. August 2016 15:24
An: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org >
Betreff: [Freeswitch-users] mod_verto and https://webrtc.freeswitch.org/verto/index.html#page-main
Hi,
it is my first time with mod_verto.
The certificate is generated like described here: https://webrtc.freeswitch.org/
verto/index.html#page-main And the ca.crt is installed on the client pc. But the following error message is again:
2016-08-24 15:03:47.044880 [INFO] mod_verto.c:4025 192.168.241.2:43246 Client Connect.
2016-08-24 15:03:47.044880 [INFO] mod_verto.c:1978 192.168.241.2:43246 Starting client thread.
2016-08-24 15:03:47.084876 [DEBUG] mod_verto.c:1825 192.168.241.2:43246 WS SETUP FAILED []
2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2005 192.168.241.2:43246 Ending client thread.
2016-08-24 15:03:47.084876 [INFO] mod_verto.c:2013 192.168.241.2:43246 Thread ended
What can I do? Is the certificate the problem?
The Client PC and the Freeswitch PC are in the same Network Cluster.
The Freeswitch PC is a Debian 8.5 system.
Thanks a lot
Alex
____________________________________________________________ _____________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch- users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ options/freeswitch-users
http://www.freeswitch.org