Have you reviewed
http://pastebin.freeswitch.org/12617 ?
It has the G729 set in the codecs section.
In this one it seems the call does not get to the external gateway.
Freeswitch stops the call before calling the external gateway
I have checked it again a few times using the bypass_media,
proxy_media settings.
And with those settings the call ends as soon as ringing starts or as
sonn as the call is answered.
I will do another one just to confirm
On 4 April 2010 19:35, David Ponzone <
david.ponzone@gmail.com> wrote:
No, FreeSWITCH does NOT need to be in bypass media or proxy media.
You just need the regular passthrough module: mod_g729 and to allow G729 as
inbound and outbound codecs in vars.xml.
To summarize:
-normal mode (proxy disabled, bypass disabled): FreeSWITCH is in the RTP
path, it relays the audio stream between endpoints, but can still detect
DTMFs
-proxy media enabled: FreeSWITCH relays the audio stream transparently, DTMF
detection is impossible. In this mode, FS is really a "dumb" transparent
RTP-forwarder (this is required to get T38 working between the 2 endpoints)
-bypass media enabled: FreeSWITCH is not in the RTP path
David Ponzone Direction Technique
email: david.ponzone@ipeva.fr
tel: 01 74 03 18 97
gsm: 06 66 98 76 34
Service Client IPeva
tel: 0811 46 26 26
www.ipeva.fr - www.ipeva-studio.com
Ce message et toutes les pièces jointes sont confidentiels et établis à
l'intention exclusive de ses destinataires. Toute utilisation ou diffusion
non autorisée est interdite. Tout message électronique est susceptible
d'altération. IPeva décline toute responsabilité au titre de ce message s'il
a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce
message, merci de le détruire immédiatement et d'avertir l'expéditeur.
Le 04/04/2010 à 20:12, Max Clark a écrit :
Clarification - for G729 does freeswitch need to be in "bypass media"
or "proxy media"? My understanding was that G729 would work with
"proxy media" enabled and without the new fangled module?
-Max
On Fri, Apr 2, 2010 at 2:23 AM, Jason White <jason@jasonjgw.net> wrote:
Frank Church <vfclists@googlemail.com> wrote:
I am just trialling Freeswitch with Linksys adapters, whose default
codec I have set to G729 with 'Use Pref Codec Only:' set to no.
When I change that setting to 'yes' the calls don't go through. I am
using the latest Windows SVN.
FreeSWITCH only supports G.729 in pass-through mode (i.e., with bypass media
enabled). Apparently you can buy a G.729 licence for FreeSWITCH if you
really
need it.
My recommendation would be to use a codec other than G.729 unless you have a
compelling reason, for example a carrier that only supports G.729.
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Frank Church
=======================
http://devblog.brahmancreations.com_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org