Hi,

  I am using Freeswitch with Sangoma A102 and Openzap. I have configured the extension in default.xml as

default.xml
 <extension name="Long Distance - wanpipe">
    <condition field="destination_number" expression="^0([0-9]+)$">
      <action application="set" data="dialed_ext=$1"/>
      <action application="bridge" data="openzap/${dialed_ext}"/>
     </condition>                 
   </extension>

openzap.conf
[span wanpipe]
 trunk_type => e1
 b-channel => 1:1-15
 d-channel=> 1:16
 b-channel => 1:17-31

openzap.conf.xml
 <configuration name="openzap.conf" description="OpenZAP Configuration">
<settings>
  <param name="debug" value="0" />
  </settings>
<pri_spans>
<span id="1">
  <param name="mode" value="user" />
  <param name="dialect" value="euro" />
  <param name="dialplan" value="XML" />
  <param name="context" value="default" />
  </span>
  </pri_spans>
  </configuration>


Whenever I am dialing thru my softphone i get the no route in freeswitch console as

2008-09-17 17:46:13 [INFO] mod_dialplan_xml.c:228 dialplan_hunt() Processing FreeSwitch->9894929942 in context default
2008-09-17 17:46:13 [NOTICE] switch_ivr.c:1098 switch_ivr_session_transfer() Transfer sofia/internal/1001@172.20.176.32 to enum[9894929942@default]
2008-09-17 17:46:13 [INFO] switch_core_state_machine.c:114 switch_core_standard_on_routing() No Route, Aborting
2008-09-17 17:46:13 [NOTICE] switch_core_state_machine.c:115 switch_core_standard_on_routing() Hangup sofia/internal/1001@172.20.176.32 [CS_ROUTING] [NO_ROUTE_DESTINATION]
2008-09-17 17:46:13 [NOTICE] switch_core_session.c:812 switch_core_session_thread() Session 2 (sofia/internal/1001@172.20.176.32) Ended
2008-09-17 17:46:13 [NOTICE] switch_core_session.c:814 switch_core_session_thread() Close Channel sofia/internal/1001@172.20.176.32 [CS_HANGUP]

Any help would be appreciated.
On Thu, Aug 28, 2008 at 11:52 PM, Cliconnect <cliconnect@cliconnect.com> wrote:
Thank you Brian,
 
it worked.
 
regards
 
 
Duan

 

-----Original Message-----
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West
Sent: Thursday, August 28, 2008 11:07 AM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] dialpaln

For extensions you usually have a 4 digit number so you would do this:  ^(\d{4})$  then for the pstn you would not want to match just all digits like that.  ^(\d{7,15})$

/b



On Aug 28, 2008, at 1:01 PM, Cliconnect wrote:

Hi,
 
 I can call extensions like 1000 with
 
<extension name="extensions">
     <condition field="destination_number" expression="^(\d+)$">
        <action application="bridge" data="sofia/doublenat/$1%voipclic.com "/>
        </condition>
     </extension>
 
and I can call PSTN with
 
<extension name="PSTN">
     <condition field="destination_number" expression="^(\d+)$">
      <action application="bridge" data="sofia/gateway/inphonex/$0"/>
 </condition>
  </extension>

Both config being in the same default.xml dialplan  but I must use one or the other config. What I have to do in order to have them working at the same time. In other words the same  user can call PSTN and the extension.
 
thanks
 
Duan
 



_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org




--
Thank you with regards,
Gopal,