All,

Last month I upgraded from using ftmod_sangoma_boost to ftmod_sangoma_isdn, as a result, I’m no longer getting caller_name on inbound calls.  I can see the caller_number but the caller_name is blank.

I’m running windows 32-bit, sangoma A102 card, wanpipe_6_42_1, libsng_isdn-7.1.0, GIT-Head from 4/14/11.

I’m sure it’s a configuration issue because it was working with boost.  Can someone point me in the right direction?

------- wanpipe.conf -----------

[defaults]

codec_ms => 20

wink_ms => 150

flash_ms => 750

------ freetdm.conf -----------

[span wanpipe wp1]

trunk_type => T1

group => grp1

b-channel => 1:1-23

d-channel => 1:24

[span wanpipe wp2]

trunk_type => T1

group => grp1

b-channel => 2:1-23

d-channel => 2:24

--------- freetdm.conf.xml --------

<configuration name="freetdm.conf" description="FreeTDM Configuration">

  <settings>

    <param name="debug" value="0"/>

  </settings>

  <config_profiles>

     <profile name="twtelecom">

<param name="facility" value="no" />

     </profile>

   </config_profiles>

  <sangoma_pri_spans>

    <span name="wp1" cfgprofile="twtelecom">

                                <param name="switchtype" value="national" />

                                <param name="interface" value="cpe"/>

                                <param name="dialplan" value="XML"/>

                                <param name="context" value="public" />

    </span>

    <span name="wp2" cfgprofile="twtelecom">

                                <param name="switchtype" value="national" />

                                <param name="interface" value="cpe"/>

                                <param name="dialplan" value="XML"/>

                                <param name="context" value="public" />

    </span>

  </sangoma_pri_spans>

</configuration>

...dly