Tihomir,
Thanks for help.
I enabled fast start on
IPO and I can hear voice now. But the ringback tone and voice appears to be
wheezy, but I will investigate that tomorrow.
Thanks again.
Nikolay.
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Tihomir Culjaga
Sent: Thursday, February 11, 2010
2:34 PM
To:
Subject: Re: [Freeswitch-users]
h323 - sip call is not working
Nikolay, you are sending
slow start with tunneling=true ?!?!
It is not gong to work :)
Please can you set fast start instead?
Your call failed because there was no mediaControll channel negotiated at
all... actually the call had to be aborted because wrong signaling .. but
anyhow.
Please on your IPO use FastStart with h245Tunneling=true... also, same settings
on FS side as well (exclude h245 in setup as well).
Frame 13 (277 bytes on wire, 277 bytes captured)
Ethernet II, Src: AlliedTe_22:9b:4a (00:00:cd:22:9b:4a), Dst: Vmware_67:33:a7
(00:0c:29:67:33:a7)
Internet Protocol, Src: 172.23.14.2 (172.23.14.2), Dst: 172.23.22.49
(172.23.22.49)
Transmission Control Protocol, Src Port: oirtgsvc (4141), Dst Port:
h323hostcall (1720), Seq: 1, Ack: 1, Len: 223
TPKT, Version: 3, Length: 223
Q.931
Protocol discriminator: Q.931
Call reference value length: 2
Call reference flag: Message sent from originating side
Call reference value: 0012
Message type: SETUP (0x05)
Bearer capability
Display 'Gornak Alexandr>2853'
Calling party number: '5840'
Called party number: '2853'
User-user
H.225.0 CS
H323-UserInformation
h323-uu-pdu
h323-message-body: setup (0)
setup
h4501SupplementaryService: 1 item
1... .... h245Tunneling: True
On Thu, Feb 11, 2010 at 9:18 AM, Nikolay Kondratyev <kond@nstel.ru> wrote:
> But I do recommenf to use SIP, since it's much better supported by
FS.
>
> /Peter
But SIP is poorly supported by IPO.
Thanks and regards,
Nikolay.
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org