I found the error in it. The file name is used as openzap.conf.xml ( smg_prid is specified here) and another file name as openzap.conf.wiki.xml ( PRI_1 span is specified here ). FreeSWITCH referred the PRI_1 span from openzap.conf.wiki.xml  file.

Now the another problem is raised here.
When I was using oz list command , the details of the smg_prid shown. When I was using 'oz dump smg_prid' command it shows all the channels' details. But all the channels' states are DOWN. why? How can I make it the states to UP?

When I was making the call , the number is busy message was get. The call was not  at all landed to the freeswitch.

Dial plan Example:
-------------------------------
 <extension name="PRI_Testing">
        <condition field="destination_number" expression="^39114600$">
                <action application="playback" data="ivr-welcome_to_freeswitch"/>
        </condition>
  </extension>

Please help me...........

Output Reference:
http://pastebin.org/79074

On Wed, Jan 20, 2010 at 11:25 AM, Thangappan.M <thangappan143@gmail.com> wrote:
Dear all,

         I have successfully configured wanpipe with freeswitch. When I was the running wancfg_fs script the following files openzap.conf , autoload_confg/openzap.conf.xml , /etc/wanpipe/wanpipe1.xml, smg_pri.conf are created.

         I started the wanrouter command then executed the freeswitch.
         When I was executing freeswitch mod_openzap.c said the error as  "Error  for finding the span id. name:PRI_1".
         But in the openzap.conf and openzap.conf.xml files the span name is smg_prid.
 
         Why the freeswitch is referring the span name as PRI_1 ? 
         Whether this has to configured in anywhere?

         In the freeswitch CLI using oz command I tried to dump the PRI_1 span id but it said te error  as "PRI_1 is not found".  When I was trying the command 'oz dump smg_prid'  all the channel states and details shown.
 
        It seems that smg_prid span configured in openzap perfectly (Its my assumption). Then Why freeswitch is referring the span name as PRI_1.

DID I MAKE ANY MISTAKE OR DID I MISS ANYTHING TO DO?

Could anyone please help me?

REFERENCE:

openzap.conf
[span wanpipe smg_prid]
name => smg_prid
trunk_type =>e1
b-channel => 1:1-15
b-channel => 1:17-31


openzap.conf.xml
<configuration name="openzap.conf" description="OpenZAP Configuration">
  <settings>
    <param name="debug" value="0"/>
    <!--<param name="hold-music" value="$${moh_uri}"/>-->
    <!--<param name="enable-analog-option" value="call-swap"/>-->
    <!--<param name="enable-analog-option" value="3-way"/>-->
  </settings>
  <boost_spans>
        <span id="smg_prid">
        <!--<param name="hold-music" value="$${moh_uri}"/>-->
        <param name="dialplan" value="XML"/>
        <param name="context" value="default"/>
         <!-- regex to stop dialing when it matches -->
        <!--<param name="dial-regex" value="5555"/>-->
        <!-- regex to stop dialing when it does not match -->
        <!--<param name="fail-dial-regex" value="^5"/>-->
        </span>
 </boost_spans>
 <analog_spans>
 </analog_spans>
</configuration>



         


--
Regards,
Thangappan.M



--
Regards,
Thangappan.M