Hello David,

thank you for your answer.

I have solved it by using the sip_from_uri parameter in the originate command like this.

originate {sip_from_uri=sip:55555555@123.123.123.123}sofia/gateway/Test/44444444 &park()

The caller Id is now changed to 55555555.

Regards
Ali


---------- Weitergeleitete Nachricht ----------
From: David Ponzone <david.ponzone@gmail.com>
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Date: Mon, 19 Jul 2010 14:33:47 +0200
Subject: Re: [Freeswitch-users] How to change Header (From value) while originate
You should try to set sip_cid_type=none on the outbound leg.
And also, you will probably need this in the gateway config:
<param name="caller-id-in-from" value="true"/>

David Ponzone  Direction Technique
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 19/07/2010 à 14:18, Durmuş Ali Öztürk a écrit :

Hello,

Using the origination_caller_id_number while doing a outbound call with the originate command has no effect of the caller Id.

Because, our VoIP provider demands the caller ID into the From tag (From: <originator@domain>) of the SIP header, the Remote-Party-ID and P-Asserted-Identity will be ignored.

Is there an alternative way to manipulate the From field value (which is taken from the username of a gateway profile by default)? Maybe another parameter in a originate command?

Thank you for your answer.

Ali
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



---------- Weitergeleitete Nachricht ----------
From: David Allen <david@virtutel.com.au>
To: freeswitch-users@lists.freeswitch.org
Date: Mon, 19 Jul 2010 23:18:19 +1000
Subject: [Freeswitch-users] Multiple CDRS for Bridged calls from an IVR
Hi,

I have written an IVR that prompts a user to Enter a Number and then the call is bridged to a particular gateway. If the user wishes to end the call early I have set the bridge_terminate_key=# variable and continue_on_fail=NORMAL_TEMPORARY_FAILURE so the dial plan continues which loops back to the IVR. For collection of CDRs, I'm using XML-CDR.

The problem I'm having is that each call bridged to the gateway is not producing an individual CDR record and is instead adding the CDR information as additional records under callflow in the XML when the call to the IVR is finally terminated, instead of when each bridged call is terminated. I need to get the CDR information as the call is terminated for credit control purposes or in otherwords when the bridge is termated for XML-CDR to post the calls CDR.

I have looked on the Freeswitch site for a solution to this and I have not. Is there a way that I can get information when each call ends? Hopefully someone will be able to help with this question.

Thanks
David






---------- Weitergeleitete Nachricht ----------
From: Steven Ayre <steveayre@gmail.com>
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Date: Mon, 19 Jul 2010 18:14:18 +0100
Subject: Re: [Freeswitch-users] Multiple CDRS for Bridged calls from an IVR
Try setting log-b-leg to true in xml_cdr.conf.xml, that should then generate CDRs for both the incoming call (aleg) and the outgoing calls from the bridge (bleg)

You can match them using the UUID, and identify whether a CDR is an a-leg or b-leg from the value of <direction> (it will be either inbound or outbound).

Hope that helps.

-Steve


On 19 July 2010 14:18, David Allen <david@virtutel.com.au> wrote:
Hi,

I have written an IVR that prompts a user to Enter a Number and then the
call is bridged to a particular gateway. If the user wishes to end the
call early I have set the bridge_terminate_key=# variable and
continue_on_fail=NORMAL_TEMPORARY_FAILURE so the dial plan continues
which loops back to the IVR. For collection of CDRs, I'm using XML-CDR.

The problem I'm having is that each call bridged to the gateway is not
producing an individual CDR record and is instead adding the CDR
information as additional records under callflow in the XML when the
call to the IVR is finally terminated, instead of when each bridged call
is terminated. I need to get the CDR information as the call is
terminated for credit control purposes or in otherwords when the bridge
is termated for XML-CDR to post the calls CDR.

I have looked on the Freeswitch site for a solution to this and I have
not. Is there a way that I can get information when each call ends?
Hopefully someone will be able to help with this question.

Thanks
David



_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org