Are you using ‘if (session:ready()) then’ in your scripts before you execute?
Are you using virtual or physical hardware and what spec?
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org]
On Behalf Of Grant Bagdasarian
Sent: 22 March 2017 07:31
To: FreeSWITCH Users Help
<freeswitch-users@lists.freeswitch.org>
Subject: Re: [Freeswitch-users] 100% CPU usage
Anthony, we triple checked the script and its dependencies. There are no loops at all in the script. The imported scripts are also written by us and they too do not contain any loops.
It’s just basic call handling with some playback and play_and_get_digits calls, and some pcall calls to query a database.
From:
freeswitch-users-bounces@lists.freeswitch.org
[mailto:freeswitch-users-bounces@lists.freeswitch.org]
On Behalf Of Anthony Minessale
Sent: dinsdag 21 maart 2017 16:02
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Subject: Re: [Freeswitch-users] 100% CPU usage
I already told you why a week ago. Your script most likely has an endless loop in it that does not check the condition session:ready()
However, Feel free to contact consulting@freeswitch.org and we can formally diagnose it for a fee.
On Tue, Mar 21, 2017 at 6:42 AM Grant Bagdasarian <gb@cm.nl> wrote:
Attached are the logs for:
#check thread usage:top -p $(cat /var/run/freeswitch/freeswitch.pid) -H -b -n 1#memory mapping:cat /proc/$(cat /var/run/freeswitch/freeswitch.pid)/maps
We’re unable to run gcore since freeswitch hogs all available cpu’s at 100%.
I tried changing the nice settings real-time but that didn’t work either.
At one point we had a huge spike in inbound traffic towards our freeswitch (valid traffic).
The traffic is handled by a lua application.
What we saw was calls hanging in freeswitch while they’ve already been physically disconnected.
After the huge spike freeswitch behaved normally for a couple of minutes and then suddenly started eating all the available cpu cores at 100%.
We have some db queries which are fired in the lua application, so these may cause the application to hang, but we haven’t reproduced it yet.
I’ll setup a test lab with the same configuration and fire sipp at it to see if I can reproduce the issue.
However, I probably won’t be able to run gcore for debugging. Any other suggestions?
Also we saw a lot of open udp ports and some had a huge read buffer size which did not decrease.
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Grant Bagdasarian
Sent: maandag 13 maart 2017 09:04
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Subject: Re: [Freeswitch-users] 100% CPU usage
Hi Antony and Antonio,
Thank you for the tips.
We haven’t had freeswitch going berserk anymore (not sure as to why it did perform without issue over the weekend), but will continue to monitor it and run the commands to trace the issue.
Regards,
Grant
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Anthony Minessale
Sent: zaterdag 11 maart 2017 00:07
To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org>
Subject: Re: [Freeswitch-users] 100% CPU usage
Make sure you lua script has all while loops including session:ready() as a condition to continue. Its a common mistake that leads to loops spinning out of control on hungup channels.
On Fri, Mar 10, 2017 at 6:11 AM, Antonio Silva <asilva@wirelessmundi.com> wrote:
Hi,
You can use the following commands:#get a core:gcore -o /home/gcore-$(date +%s) $(cat /var/run/freeswitch/freeswitch.pid)#check thread usage:top -p $(cat /var/run/freeswitch/freeswitch.pid) -H -b -n 1#memory mapping:cat /proc/$(cat /var/run/freeswitch/freeswitch.pid)/maps
you can get some info from fs:fs_cli -x "sofia global siptrace on"fs_cli -x "fsctl debug_level 10"fs_cli -x "sofia loglevel all 9"fs_cli -x "fsctl debug_sql "fs_cli -x "sofia global debug presence"
Put everything into a jira so we can take a look.
Regards,
António
On 03/10/2017 11:08 AM, Grant Bagdasarian wrote:
Hi,
We’re currently experiencing a weird issue with one of our freeswitch servers where the CPU just goes berserk and stays at 100%.
There are no active calls at that moment, but FS is still using 100% CPU.
I was unable to get a debug using gdb, since freeswitch does not crash.
We had this issue on 1.6.13 and then I upgraded to 1.6.15 this morning, but the problem still persists.
There is currently only one active application running on this box which is using LUA. Maybe that is causing the issue?
We checked the code but there are no weird loops etc. Perhaps we are missing something?
Any ideas how to trace this?
Regards,
Grant
_________________________________________________________________________Professional FreeSWITCH Consulting Services:consulting@freeswitch.orghttp://www.freeswitchsolutions.comOfficial FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon.comFreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org
--Saludos / Regards / Cumprimentos,António silva
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ irc.freenode.net #freeswitch ☞ http://freeswitch.org/g+
ClueCon Weekly Development Call
☎ sip:888@conference.freeswitch.org ☎ +19193869900
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
--
Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ irc.freenode.net #freeswitch ☞ http://freeswitch.org/g+
ClueCon Weekly Development Call
☎ sip:888@conference.freeswitch.org ☎ +19193869900
______________________________________________________________________
This message has been checked for all known viruses by
MessageLabs Virus Scanning Service.
______________________________________________________________________
 |
Company No. 06908001
CONFIDENTIALITY NOTICE
This communication and the information it contains are intended for the person or organisation to which it is addressed. Its contents are confidential and may be protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you are not the intended recipient, please contact us immediately.
The contents of any attachments in this e-mail may contain software viruses, which could damage your own computer system. While ITEC Support has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checking procedure before opening any attachment.
______________________________________________________________________
This message has been checked for all known viruses by MessageLabs Virus Scanning Service.
______________________________________________________________________
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org