Hello.

I was using FreeSwitch from 2010/09/09 (don't have the exact git version sorry) but I recently updated it with version from 2010/12/09 (git-e680c82 2010-12-09 08-59-06 -0600). I run an application that handles web requests and convert them to originate calls. Everything was working fine but now, anytime I try an originate call, everything goes wrong.

Here is what I do (to originate a call from 26 to 27):
- bgapi originate {{parameters }}sofia/internal/26% 27
  with the following parameters:
    origination_caller_id_name='{0}',
    origination_caller_id_number='{1}',
    originate_timeout=20,
    effective_caller_id_name='{2}',
    effective_caller_id_number='{3}',
    allow_outside_calls={0},
    outside_calls_gateway={1}
  (the last two parameters are user parameters I use in my dialplan)
- phone 26 starts ringing and I pick it up (silence on the line)
- phone 27 starts ringing and I pick it up (lots of deafening noise + phone freezes after a few seconds)

As I said, it was working fine with version from early september. I did not find anything useful in the logs or in the config. Has anything changed ? What can I do to solve this problem ?

I tested with a Grandstream GXP2000 and a SNOM M3 and only the Grandstream has the problem. I suspect a codec issue but what puzzles me is that it was previously working and that it completely freezes the phone.

Thanks,
Sebastien