If anything should be changed it's to add an additional
actual_register_domain header in the cases when it's being forced but it's not completely necessary.
Typical example is when a client is using the ip address in the domain field and you want to force it
to point at the domain name in your registry.
The point of the param is to ignore the real domain supplied in the client and normalize all registrations to a certian domain in your db.
if you want to call registered users with this mode of operation you also need the force-register-db-domain
which takes it a step further and writes the forced domain into the registration db so when you try to call user/<id>@<domain>
it will find it.
>> a) Should sip_auth_realm be set by FreeSWITCH to the value associated
>> with force-register-domain
>
> You have to remember the default assumes a lot. You go to changing
> things you have to then change the way things are assumed.
I appreciate that. Let me ask the question slightly differently.
sofia_reg_parse_auth contains the following logic:
if (!switch_strlen_zero(profile->reg_domain)) {
domain_name = profile->reg_domain;
} else {
domain_name = realm;
}
where profile->reg_domain is set from force-register-domain.
It then calls switch_xml_locate_user using domain_name.
It looks like force-register-domain is intended to make
FreeSWITCH believe that the user is in domain specified by
force-register-domain.
Later there's:
switch_event_add_header_string(*v_event, SWITCH_STACK_BOTTOM,
"sip_auth_realm", realm);
switch_event_add_header_string(*v_event, SWITCH_STACK_BOTTOM,
"domain_name", realm);
Shouldn't the add_header for domain_name contain the value for
the actual domain used to locate the user?
And ideally shouldn't the rest of FreeSWITCH (including examples
intended to get you started) work in the same fashion for consistency
sake (i.e. when trying to locate a user reference the domain used by
sofia_reg_parse_auth to locate the user instead of blindly using
sip_auth_realm)?
My thought is if sofia_reg_parse_auth set things up properly,
then the rest of FreeSWITCH shouldn't know or even care that
force-register-domain is in use ... it should be as if the
VoIP phone had in fact registered using the domain specified
by force-register-domain.
-- John
-------------------------------------------------------------------------
| Feith Systems | Voice: 1-215-646-8000 | Email: john@feith.com |
| John Wehle | Fax: 1-215-540-5495 | |
-------------------------------------------------------------------------
_______________________________________________
Freeswitch-users mailing list
Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org