Yea I’m running the most current Polycom firmware release.  Not sure if it’s an isolated incident.  Not sure the best way to troubleshoot this issue short of the standard siptrace tool and wireshark.  

What codec are you using?

Sean

On 4/17/10 9:23 AM, "Chris Fowler" <chris@fowler.cc> wrote:

Hi Sean,
 
We have about 20 of the 321’s running; the rest are 450’s – total ~100 phones hooked into FS.
 
No similar audio problems – running with the standard 3.2.3 SPIP firmware from Polycom.
http://downloads.polycom.com/voice/voip/sip_sw_releases_matrix.html
 
Chris.
 
 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Sean Holt
Sent: Saturday, April 17, 2010 9:02 AM
To: freeswitch-users@lists.freeswitch.org
Subject: [Freeswitch-users] Audio quality
Hello,

Wanted to say thanks for all the great work the freeswitch dev team is doing.  Also thanks for the support on this list.

My question is:

I have a polycom 321 phone and I’m having a audio issue when using the speaker.  The inbound quality is really good, but the outgoing audio sounds digitized or broken.  I’m curious is there a setting I can adjust to solve this issue.   Outgoing quality is good when using the handset.  I have the most recent svn checkout.

Has anyone ever experienced this issue?

Thanks in advance
Sean

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org