Sergey,

you are confusing me.
It seemed to me that when you have only one destination leg, {} and [] are the same.

David Ponzone  Direction Technique
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 24/09/2010 à 22:28, Sergey Okhapkin a écrit :

Correction:

bridge [sip_cid_type=none]sofia/etc

[] but not {}

On Friday 24 September 2010, David Ponzone wrote:
Mario,

To save you some time, most carriers will accept in the FROM field.
AFAIR, FS defaults to Remote-Party-Id, so perhaps you just need to set
this before your dialstring:
bridge {sip_cid_type=none}sofia/etc...

David Ponzone  Direction Technique
email: david.ponzone@ipeva.fr
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26
www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis
à l'intention exclusive de ses destinataires. Toute utilisation ou
diffusion non autorisée est interdite. Tout message électronique est
susceptible d'altération. IPeva décline toute responsabilité au
titre de ce message s'il a été altéré, déformé ou falsifié. Si
vous n'êtes pas destinataire de ce message, merci de le détruire
immédiatement et d'avertir l'expéditeur.

Le 24/09/2010 à 21:54, Sergey Okhapkin a écrit :
Does the gateway uid1 allow to specify CID number?

On Friday 24 September 2010, Mario wrote:
I am bridging a call from either inside or outside to an emergency
number on an att cellphone which works fine. I am trying to pass the
original caller id or anything else for that matter as the caller
id/name. I only get "unknown". I also tried to send to a VOIP
number and
it also gets "unknown" so I am thinking it is not att. I tried
various
combinations of things I found on the web but nogo. Anyone see the
problem below? Thanks!
Mario

 <extension name="mx911">
   <condition field="destination_number" expression="^2911$">
     <action application="set"
data="effective_caller_id_name=Emergency"/> <action application="set"
data="effective_caller_id_number=9161234567"/>
     <action application="set" data="hangup_after_bridge=true"/>
     <action application="bridge" data="sofia/gateway/
uid1/19161112222"/>
   </condition>
 </extension>

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org



_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org