Partial PRI D-chan=24 B-chans=16-23

We are having trouble with the Partial PRI (channel 16) getting stuck in
a state where it cannot take calls.  This happens intermittently.  The
system may run several days or even a week or two without having the
problem.  It seems that the channel is getting stuck in some odd state
when trying to hang up.

To resolve this, we unload the FreeTDM mod, restarting Wanrouter, and
then reload the FreeTDM mod.  This clears the channels and allows the
system to take calls normally again.

In testing we have also observed the following conditions:

1. Place a call in.  Cannot complete. Hang up.
2. Place a call in.  It completes and works correctly.
3. Place a call in.  Cannot complete.  Hang up.
4. Place a call in.  It completes and works correctly.

The above pattern can be repeated multiple times, with the same result.

Are you aware sangoma_boost module is deprecated? you should be using ftmod_sangoma_isdn

When the channel gets stuck you can do ftdm dump <span> <channel> and pastebin the output (there should be a state history at the bottom that helps to fix this type of problems).

Moises Silva