On Mon, Dec 28, 2009 at 5:19 PM, Jerry Richards <jerry.richards@teotech.com> wrote:

Hello All,

I posted a FS log into the Pastebin at http://pastebin.freeswitch.org/11644.

I am still having the problem where a PSTN-to-Internal call via a Sangoma
A101D card stops ringing the internal phone after about 10 seconds. It
should be ringing for 30 seconds and then go to Voice Mail (as an
Internal-to-Internal call does).

Best Regards,
Jerry

-----Original Message-----
From: Jerry Richards [mailto:jerry.richards@teotech.com]
Sent: Tuesday, December 22, 2009 8:02 AM
To: 'freeswitch-users@lists.freeswitch.org'
Subject: PSTN-to-Internal Call Does Not Get Routed to Voice Mail

I have a Freeswitch PBX server with an installed Sangoma A101D card
connected to a PRI. Most everything works okay, however when I get an
inbound call from the PSTN, if the call is not answered within about 12
seconds, the call ends (so it doesn't go to voice mail). If I make a call
from one internal phone to another, then it will go to voice mail after 30
seconds. How can I get the external call to route to voice mail after 30
seconds?

I put a new 11595 log into the pastebin. Do you know any Freeswitch setting
that might cause this?

If this issue has been addressed before, what string should I use to search
for it, because I can't find it.

Thanks,
Jerry

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org