Solved this in a very hacky way - replying here in case this helps someone (although very hacky).open freeswitch/libs/freetdm/configure.ac
find HAVE_SNG_ISDN="no"and change it to HAVE_SNG_ISDN="yes"finally, build FS againPlease take care that this tells configure to build ftmod_sangoma_isdn even if its check for the library fails!Is there a less hacky / more straitforward way?Regards,Kshitij Saxena_________________________________________________________________________On Tue, Mar 25, 2014 at 7:46 PM, Kshitij Saxena <ksaxmail@gmail.com> wrote:ok. The problem seems to be that ftmod_sangoma_isdn hasn't been compiled.This is strange because I had compiled both wanpipe as well as libsng_isdn before configuring FS.
I repeated the steps again in case I had missed something - recompiled libsng_isdn, began FS with make clean, then bootstrap, then configure and make but ftmod_sangoma_isdn is still not being compiled!Am I missing something? Is this a bug?Regards,KshitijOn Tue, Mar 25, 2014 at 6:03 PM, Kshitij Saxena <ksaxmail@gmail.com> wrote:
The setup is a Sangoma A101E card being run through Wanpipe 7.0.10 on an Ubuntu 13.10 machine.wanrouter status shows "connected" but "originate freetdm/1/a/xxxxxxxxxx &bridge..." fails with the following error:[ERR] ftdm_io.c:2674 [s1c1][1:1] outgoing_call method not implemented in this span!Note that originate is successful with for other cahnnels (i.e. "originate user/1001 &bridge(9198)" works for example)Would appreciate any guidance. Thanks!Regards,Kshitij Saxena
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org