Hello All,<div><br></div><div><br></div><div><br></div><div>I have a FreeSWITCH install running on CentOS 5.6 on a Linode VPS. I am trying to get my SPA112 (Version 1.1 Firmware) to send faxes (and eventually receive) successfully. I have the ATA registered as an extension and it&#39;s primary outgoing route is through Flowroute. I have T.38 enabled on the ATA and I have diabled ECM on the analog fax machine. All of the CDR&#39;s in Flowroute show that the test faxes are all ending their calls at 39 seconds.
</div><div><br></div><div><br></div><div>I can post screen shots of the ATA config or provide any other config info.</div><div><br></div><div><br></div><div>Is there something I am missing, or should this setup work? </div>

<div><br></div><div>I have poked around for a while for info, but unlike the PAP2T there is little info on these SPA112&#39;s. This is my first post asking for help as I usually try to resolve things on my own. But for this, I will defer to everyone&#39;s experience.</div>


<div><br></div><div><br></div><div><br></div><div>Thanks,</div><div><br></div><div>-Chris</div>