What command can I use to see if trans coding is happening? I am generating the calls from winsip and passing them to free switch which is sending them to a SIPp instance that is just echoing back the rtp stream.

On Tue, Sep 14, 2010 at 11:08 AM, Mathieu Rene <mrene_lists@avgs.ca> wrote:

Transcoding will only happen if it has to, if the codecs are the same on both channels (same type, ptime and sample rate), FreeSWITCH will just pass the audio frame without touching it. If you see transcoding happening, chances are one of those variable isn't matching.

Mathieu Rene

Avant-Garde Solutions Inc

Office: + 1 (514) 664-1044 x100

Cell: +1 (514) 664-1044 x200

mrene@avgs.ca

On 2010-09-14, at 10:40 AM, Steven Ayre wrote:

Tim - are you using mod_g729 or mod_com_g729?

-Steve

On 14 September 2010 15:32, David Ponzone <david.ponzone@ipeva.fr> wrote:

Tim,

I dont think there is any proper G729 pass-through configuration.

If a call is G729-passthrough, it should have (AFAIK) the same CPU-footstep than G711.

Do you have G729 licenses on the host ?

If yes, are you sure they are not used ?

Have your checked your logs for any transcoding issues ?

(grep ERR freeswitch.log | grep -i transcod)

David Ponzone  Direction Technique

email: david.ponzone@ipeva.fr

tel:      01 74 03 18 97

gsm:   06 66 98 76 34

Service Client IPeva

tel:      0811 46 26 26

www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.

Le 14/09/2010 à 16:07, Tim King a écrit :

Can someone help point me toward proper configuration of G.729 pass through. I have a system with Dual Quad Core Xeons. It will hold up 1000 G.711u calls no problem with cpus 80% idle, however if I switch to G.729 I spike the cpu's at around 400 calls.

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org