On Dec 3, 2019, at 7:39 PM, John Covici <covici@ccs.covici.com> wrote:

Thanks  for your response.

I don't know how to read the pcap file, so here is  a link to the
file, maybe you can figure it out better than I can.

https://covici.com/owncloud/index.php/s/yHS2Tc4Z2FEeGZb


On Tue, 03 Dec 2019 18:52:41 -0500,
Mike Jerris wrote:

[1  <multipart/alternative (7bit)>]
[1.1  <text/plain; us-ascii (quoted-printable)>]
Can you check a pcap to confirm.  This MAY be an issue I just saw last week and have to do with rtp timestamps.  If you can confirm that rtp is sending out but the timestamps dont seem right, that would confirm it.  

On Nov 29, 2019, at 11:28 AM, John Covici <covici@ccs.covici.com> wrote:

I have the log of the call which looks normal.  My guess is that  rtp
is not properly being sent out, for some reason.  The hangup cause is
always normal_clearing.

On Fri, 29 Nov 2019 13:06:12 -0500,
David Villasmil wrote:

[1  <multipart/alternative (7bit)>]
[1.1  <text/plain; UTF-8 (7bit)>]
Do you have any trace?

On Fri, 29 Nov 2019 at 18:05, John Covici <covici@ccs.covici.com> wrote:

Some more information -- even after pressing a digit and getting
audio, it hangs up after about 30 seconds.

On Fri, 29 Nov 2019 10:46:21 -0500,
John Covici wrote:

Hi.  I finally was able to upgrade fs to master as of llast night.
Its working well, except if I use portaudio to make a call.  This all
worked find in fs 1.6.20.

When I call someone I cannot hear anything until I send it a dtmf
(rfc2283) and then things work normally, at least I can hear
something.  I had a look at the logs, but nothing strange in there
after typing the digit.

Also, I cannot call a local extension from port audio, even though the
extension is registered and can be called from another extension.  It
immediately goes to voicemail.

Thanks in advance for any suggestions.