(sorry for this repost, but the previous one was by mistake sent with the wrong subject, which was bad for the readability of this thread).

Guru,

you may find a refurbished Cisco "POE" switch :)

For the router part, you may also check Zeroshell (http://www.zeroshell.net/eng/).
It's more CPE-oriented and more multi-purpose than Vyatta.

David Ponzone  Direction Technique
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 18/05/2010 à 16:10, David Ponzone a écrit :

Like Jeremy, I would recommend Vyatta :)
I am not using that in production yet, but I am considering it for my BGP core routers.

it's possible to install it in a VM to play with it.

David Ponzone  Direction Technique
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 18/05/2010 à 15:46, Jeremy Shaffner a écrit :

Hello,

Like David, I would suggest a Cisco switch as well.

For a router, if you want flexibility and Linux, you could use Vyata, either on your own hardware or with one of their appliances.

-Jeremy


On May 18, 2010, at 5:27 AM, guru singh wrote:

Hi,

Please recommend a 24 port, full-duplex, PoE switch. I'll be plugging
Cisco 7940 phones into it. Also which gateway router do you recommend?
It needs to have 4 ports and should allow QoS and VLAN tagging. I'd
prefer something that is unlocked and can run linux/openwrt.

Thanks
gs

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org